CoreParts MMKN134-32GB geheugenmodule 1 x 32 GB DDR4 260-pins SO-DIMM

The CoreParts MMKN134-32GB is a 32 GB DDR4 SO-DIMM memory module with a clock speed of 3200 MHz and a 260-pin form factor. Designed for laptops and compact systems, this CoreParts DDR4 32GB 3200 MHz module delivers higher memory capacity and improved multitasking performance while using original chip sets from certified suppliers.

Advantages

This memory module offers 32 GB capacity, DDR4 architecture and a 3200 MHz clock speed to support smoother application performance and better multitasking. The 260-pin SO-DIMM format ensures compatibility with many laptops and small-form-factor systems. Components use original chip sets from trusted manufacturers to match the performance of factory-installed modules.

Suitable for

• Upgrading laptop memory for improved multitasking
• Replacing a faulty SO-DIMM module in notebooks
• Increasing memory capacity in compact PCs and mini-PCs that accept 260-pin DDR4 SO-DIMM

Key specifications

• Brand: CoreParts
• Model: MMKN134-32GB
• Capacity: 32 GB
• Type: DDR4
• Speed: 3200 MHz
• Form factor: 260-pin SO-DIMM
• MPN: MMKN134-32GB
• EAN: 5715063007068
• Weight: 0.2 kg

How to use

Power off the laptop or small-form-factor PC and disconnect it from mains. Open the memory compartment following the device manufacturer's instructions. Carefully remove any existing SO-DIMM if replacing, align the notch of the CoreParts DDR4 32GB 3200 MHz module with the slot, insert at an angle and press down until the retention clips engage. Reassemble the device and power it on. Check system settings or BIOS/UEFI to confirm the new memory is recognized and operating at the expected speed.

Recommendations

Ensure the target device supports DDR4 260-pin SO-DIMM modules and the 32 GB capacity per module. If the system does not boot or recognize the module, reseat the module and verify BIOS/UEFI settings; consult the device manual for memory upgrade limits and compatibility.