Lenovo koelventilator en koellichaam — CPU-koeleenheid, OEM-vervanging

Lenovo Cooling fan and heatsink — CPU cooling assembly, OEM replacement is a factory-designed combination of a cooling fan and metal heatsink intended to replace the original thermal module in compatible Lenovo systems. This assembly transfers heat away from the processor through a fitted heatsink and active fan airflow to maintain operating temperatures within the designed range, supporting stable system performance during routine computing and heavier loads. The unit is intended for repair, maintenance or refurbishing of laptops or small form-factor desktops that use this specific OEM cooling module.

Advantages

The integrated fan-and-heatsink design provides direct heat dissipation from the CPU to reduce thermal throttling and help preserve performance under load. As an OEM replacement, the assembly matches original mechanical fitment and connector type for straightforward installation in compatible Lenovo systems. The metal heatsink ensures efficient thermal conduction while the dedicated fan maintains airflow to remove heat from fins and vents. This assembly enables targeted cooling without requiring full-system replacement.

Suitable for

• Repairing or replacing a failed CPU cooling module in compatible Lenovo laptops or compact desktops
• Routine maintenance or refurbishment projects where original OEM parts are preferred
• Systems exhibiting elevated CPU temperatures, fan noise from worn bearings, or thermal throttling

Key specifications

• Type: integrated fan and metal heatsink CPU cooling assembly
• Function: active cooling for processor heat dissipation
• Cooling method: heat conduction to heatsink combined with forced-air flow from fan
• Compatibility: designed for specific Lenovo system models that use this OEM cooling module
• Mounting: system-specific bracket and connector for direct replacement installation

How to use

Power off the system, disconnect power and remove the battery where applicable before beginning work. Access the internal compartment following the service manual for your specific Lenovo model, remove the old cooling assembly by unscrewing mounting points and disconnecting the fan cable from the motherboard, then install the replacement unit in the same orientation. Ensure the heatsink mating surface and CPU contact area are clean, apply the appropriate thermal interface material as specified by the manufacturer, secure all mounting screws to the prescribed torque sequence, reconnect the fan cable, and reassemble the system. After reassembly, power on and verify fan operation and acceptable CPU temperature under normal load.

Recommendations

The replacement cooling assembly should be installed by a qualified technician or by following Lenovo's official service instructions. Use only the recommended type and amount of thermal paste and verify compatibility with your exact system model. Regularly clean air intakes and ventilation paths to sustain cooling efficiency and inspect the fan for unusual noise or reduced speed.