MDT BE-TAS8606.02 KNX Smart 86 taster met kleurendisplay, kunststof, zwart

The MDT BE-TAS8606.02 KNX Smart 86 push button is a flush-mounted control element for KNX building automation. It features a 2.4-inch colour TFT display and six operating surfaces, three on each side of the display. Each surface can trigger up to four functions via short and long presses, with two communication objects per surface. Integrated sensors for temperature, humidity, proximity, and brightness enable automatic display brightness adjustment and room thermostat functionality. The device supports up to 15 customizable pages, 10 logic blocks, and 10 scene functions. Configuration is done via ETS5 or higher, with firmware updates possible through ETS. The push button is made of black plastic and is designed for installation in 60 mm switch boxes. Power is supplied via the KNX bus, and the operating temperature range is -5 °C to +45 °C.

Key specifications

• Bus system: KNX
• Display: 2.4-inch colour TFT, 240 x 320 pixels
• Operating surfaces: 6 (3 per side)
• Functions per surface: up to 4 (short/long press, 2 objects)
• Integrated sensors: temperature, humidity, proximity, brightness
• Thermostat function: integrated room thermostat
• Material: plastic, colour black
• Mounting: flush-mounted, for 60 mm switch boxes
• Power supply: KNX bus
• Protection class: IP20
• Operating temperature: -5 °C to +45 °C
• Customizable pages: up to 15
• Logic blocks: 10
• Scene functions: up to 10
• Firmware update: via ETS
• ETS version required: ETS5 or higher
• Special features: day/night mode, PIN protection, automatic display brightness

Why choose it

This push button combines a clear colour display with flexible control options and integrated sensors, making it suitable for demanding KNX installations. The automatic brightness adjustment and PIN protection enhance usability and security.

Ideal use cases

• Residential building automation
• Commercial building control
• Hotel room management
• Conference room control

Good to know

The device is configured with ETS5 or higher. The proximity sensor can wake the display when a person approaches. The integrated temperature and humidity sensors enable climate control without additional devices.