Netwerkswitch Cisco CATALYST 1300X 24 poort 2,5GE UPoE met 4x10G SFP+ uplinks (model C1300X-24MU-4X)

The Cisco CATALYST 1300X 24-port 2.5GE UPoE with 4x10G SFP+ uplinks (C1300X-24MU-4X) is an access-layer Ethernet switch that provides 24 multi-gigabit RJ-45 ports with 2.5 Gigabit Ethernet performance per access port and UPoE power delivery. Four 10G SFP+ uplink ports offer high-capacity aggregation to core or distribution layers. The unit is designed to support higher wireless and edge device bandwidth needs while supplying power to PoE/UPoE-capable devices, enabling simplified cabling and consolidated network topologies for small to medium business and branch deployments.

Advantages

The switch delivers increased per-port bandwidth compared with standard 1G access switches, enabling improved performance for Wi‑Fi 6/6E access points and multi-gig capable endpoints without rewiring. Integrated UPoE simplifies deployment of powered devices by supplying higher power levels over existing copper infrastructure. Four dedicated 10G SFP+ uplinks provide scalable aggregation to distribution or core switches, supporting higher throughput and lower latency for aggregated traffic. The form factor and port density are suited for wiring closets and small data rooms where multi-gig access and fiber uplinks are required.

Suitable for

• Campus or branch office access layer for Wi‑Fi 6/6E access points
• Edge connectivity for multi-gig desktop devices and IP telephony
• Small to medium business aggregation to distribution/core layers
• Wiring closets and compact network rooms requiring fiber uplinks

Key specifications

• 24 RJ-45 multi-gigabit ports supporting up to 2.5 Gbps per access port
• UPoE power delivery to support higher-power PoE devices
• 4 × 10G SFP+ uplink ports for fiber or direct-attach connections
• Fixed form factor with enterprise-grade switching capabilities
• Low-latency forwarding suitable for converged data and voice traffic

How to use

Mount the switch in a standard rack or place it on a stable surface in a wiring closet. Connect access devices such as Wi‑Fi access points, desktops, IP phones, or cameras to the RJ-45 multi-gigabit ports. Use Category 5e/6 cabling to obtain multi-gigabit speeds where supported by the connected devices. Configure uplink connectivity using the 10G SFP+ slots and compatible transceivers or DAC cables to connect to distribution or core switches. Configure basic switch settings, VLANs, PoE/UPoE priorities and power budgets using the device management interface or supported management tools according to network policies.

Recommendations

Ensure attached devices support multi-gigabit speeds to benefit from 2.5GE ports and verify cable quality (Cat5e/6) for consistent performance. Plan PoE/UPoE power budget allocation to avoid overcommitment when powering multiple high-draw devices. Use appropriate SFP+ transceivers or direct-attach cables rated for 10G to match uplink distance and media requirements.