Geheugen DDR4 SIGNATURE 8GB/2400 (1*8GB) CL17 SODIMM

PATRIOT Signature Line 8 GB DDR4 2400 MT/s 262-pin SO-DIMM 1.2V CL17 is a laptop memory module designed to upgrade or replace existing notebook RAM. This single 8 GB DDR4 SO-DIMM operates at an effective data rate of 2400 MT/s, uses a 262-pin SO-DIMM form factor and runs at 1.2 V with CAS latency 17. The module is intended to improve system responsiveness for multitasking, office applications, web browsing and light content editing on small form-factor computers and laptops.

Advantages

The module provides a straightforward plug-and-play memory upgrade that adheres to DDR4 standards and is hand tested for compatibility and reliability. Its 1.2 V operating voltage supports efficient power consumption in portable systems, while the 2400 MT/s data rate and CL17 latency balance performance and stability for mainstream computing tasks. The compact 262-pin SO-DIMM format is compatible with most notebooks and laptops that accept DDR4 SO-DIMM modules.

Suitable for

• Upgrading laptop memory to improve multitasking and responsiveness
• Replacing a faulty or failed SO-DIMM module in a notebook
• Office productivity work, web browsing and email
• Light photo or document editing and media playback

Key specifications

• Capacity: 8 GB
• Memory type: DDR4
• Data rate: 2400 MT/s
• Form factor: 262-pin SO-DIMM
• CAS latency: CL17
• Operating voltage: 1.2 V
• Weight: 0.0095 kg

How to use

Power down the laptop and disconnect all power sources before accessing the memory compartment. Consult the laptop manufacturer’s manual for the exact SO-DIMM slot location and removal procedure. Align the 262-pin module with the slot keyed notch, insert at the recommended angle and press down until the side clips secure the module in place. After reassembly, power on the system and verify that the BIOS/UEFI and operating system recognize the new 8 GB module and the total system memory.

Recommendations

Install memory in matched pairs where the laptop supports dual-channel operation to maximize bandwidth; check the motherboard or system documentation for supported configurations and maximum memory capacity. Ensure static-safe handling and avoid contact with the gold edge connector. If the system does not boot or recognize the module, reseat the module and confirm BIOS settings or update firmware if needed.