SeeEyes testmonitor multiformat voor installatie HD-TVI/CVI/AHD HD-SDI EX-SDI FBAS

An 8-inch IPS touchscreen with 1920x1200 resolution puts every pixel of an 8MP HD-TVI, HD-CVI, AHD, or EX-SDI camera feed under your fingertips—no squinting, no guesswork. The SeeEyes SC-MFM07HD is a professional multiformat test monitor built for installers who demand instant, accurate verification on site.

Overview

This Android-based tester combines analog HD, SDI, IP, and CVBS signal analysis in one rugged handheld. A single BNC input auto-detects HD-TVI, HD-CVI, AHD, HD-SDI, EX-SDI, and CVBS, while a Gigabit Ethernet port with PoE output powers and tests IP cameras up to 4K. The built-in 7.4V 7800mAh Li-Polymer battery delivers up to 10 hours of continuous operation, so a full day of commissioning won't be cut short.

What stands out

• 8-inch IPS touchscreen with 1920x1200 resolution for razor-sharp image inspection
• Supports HD-TVI, HD-CVI, AHD up to 8MP; HD-SDI up to 3G; EX-SDI up to 8MP; CVBS
• IP camera testing: H.265/H.264 up to 4K, ONVIF, RTSP, PoE output (48V/24W)
• Built-in TDR cable test for UTP and coaxial cables—locate shorts, opens, and crosses instantly
• RS485 PTZ control (Pelco-D/P) plus IP PTZ for dome and PTZ setup
• Network tools: ping, IP scan, port scan, DHCP server, and Wi-Fi analyzer
• HDMI output (up to 1080p) for viewing on a larger display
• MicroSD slot (up to 64GB) for firmware, screenshots, and recordings
• Rugged, portable design with built-in speaker and audio input for two-way audio testing

Technical details

• Display: 8-inch IPS LCD touchscreen, 1920x1200, 16:10 aspect ratio
• Analog HD/SDI input: 1x BNC (auto-detection), supports HD-TVI/CVI/AHD up to 8MP, HD-SDI up to 3G, EX-SDI up to 8MP, CVBS (NTSC/PAL)
• IP input: 1x RJ45 Gigabit Ethernet, H.265/H.264 up to 4K, ONVIF, RTSP, PoE output 48V/24W
• Video outputs: 1x HDMI (up to 1080p), 1x BNC (CVBS loop-out)
• PTZ control: RS485 (Pelco-D/P), IP PTZ
• Cable testing: TDR for UTP (short/open/cross) and coaxial cable
• Network tools: ping, IP scan, port scan, DHCP server, Wi-Fi analyzer
• Audio: 1x audio input, built-in speaker
• Storage: MicroSD card slot (up to 64GB)
• Battery: Built-in 7.4V 7800mAh Li-Polymer, up to 10 hours operation
• Connectivity: Gigabit Ethernet, Wi-Fi 2.4/5GHz, USB 2.0
• Operating system: Android-based
• Operating temperature: -10°C to 50°C
• Power output for cameras: DC 12V/3A, PoE 48V/24W

Our verdict

The SeeEyes SC-MFM07HD is the Swiss Army knife of CCTV installation—every critical test function in one bright, responsive package. If you install or service surveillance systems, this monitor will pay for itself in saved trips and faster troubleshooting.