Slaapmat Robens Campground 75 — zelfopblazende campingmat, 75 mm dik, model 310135

Robens Campground 75 is a self-inflating camping mat with 75 mm foam thickness designed to provide cushioning and thermal insulation for overnight stays outdoors. The mat combines closed-cell foam and an air chamber to reduce heat loss to the ground and deliver a stable, comfortable sleep surface in tents, bivouacs and car-camping setups. The model compresses for compact transport and unfolds quickly to self-inflate, allowing simple and rapid setup at campsites.

Advantages

The 75 mm foam core offers noticeable pressure distribution and improved insulation compared with thinner mats, helping to limit conductive heat transfer from the sleeper to cold surfaces. The self-inflating design reduces setup time and avoids manual inflation effort while the outer fabric provides durability against abrasion and campsite wear. The combined foam-and-air construction balances lightweight pack size with a supportive sleeping surface and consistent thickness across the pad.

Suitable for

• Multi-night tent camping where improved comfort and insulation are required
• Car camping and campsite use where weight and packed size are less critical
• Bivouac or campsite stays on uneven or rocky ground to reduce pressure points
• Campers who want a quick setup and durable, repeatable performance

Key specifications

• Type: self-inflating sleeping mat with closed-cell foam and air chamber
• Foam thickness: 75 mm
• Intended use: tent camping, bivouac, car camping
• Surface: durable outer fabric for abrasion resistance
• Packability: compresses to a compact size for transport and storage
• Setup: rapid self-inflation with adjustable valve to fine-tune firmness

How to use

Unroll the Robens Campground 75 on a clean, flat area inside the tent or shelter with the valve closed. Open the valve to allow the foam core to draw in air and self-inflate; wait until the mat reaches the desired thickness, then close the valve. For a firmer surface, add a few breaths through the valve and re-seal. After use, open the valve to release air, roll the mat tightly from the foot end toward the valve to expel residual air, then close the valve and secure with straps or the compression sack for transport.

Recommendations

Use a footprint or groundsheet under the mat to reduce abrasion and protect the surface from sharp objects. Inspect the sleeping surface and valve before packing to ensure the valve is closed and the fabric is free of debris. For prolonged cold-weather use, combine the mat with an insulated sleeping bag rated for the expected temperatures to maintain thermal comfort.