Stekkerdoos Kerg SMART 3-voudig met 4 USB (USB-A + USB-C), 1,5 m kabel, 16 A/250 V

Kerg SMART power strip provides three Type F AC outlets and four USB ports (including USB-C) for simultaneous device charging. Designed for indoor use, it features a 1.5 m cable, plastic housing in white and an integrated on/off switch. The unit is compact and lightweight, making it suitable for home and office power distribution while supporting standard mains specifications.

Advantages

The power strip combines three grounded Type F sockets with four USB ports (USB-A and USB-C) to charge multiple devices at once. A built-in on/off switch allows convenient control, while the 1.5 m cable offers flexible placement. Its plastic housing and compact dimensions make it easy to position on desks or near entertainment centers.

Suitable for

• Charging smartphones, tablets and USB-powered accessories
• Powering laptops, monitors and other office equipment (using AC outlets)
• Home entertainment setups: TV, set-top box and audio devices
• Small workstations and study desks

Key specifications

• AC outlets: 3 Type F sockets
• USB ports: 4 (including USB-C and USB-A)
• Cable length: 1.5 m
• Maximum current: 16 A
• AC input voltage/frequency: 230 V, 50 Hz
• USB output: 5 V, 2.4 A (per port maximum as specified)
• Housing material: plastic
• Placement: indoor use
• Dimensions (W×D×H): 80 × 80 × 77 mm
• Weight: 400 g

How to use

Place the power strip on a stable, dry indoor surface and plug the cable into a compatible 230 V Type F wall outlet. Connect AC devices to the Type F sockets and USB devices to the USB-A or USB-C ports. Use the integrated on/off switch to cut or restore power to the connected devices. Do not overload the strip beyond the rated 16 A total current and follow the device limits for USB charging.

Recommendations

For safe operation, avoid using the power strip in damp or wet locations, do not cover the housing while in use, and ensure the combined AC load does not exceed 16 A. Charge USB devices with appropriate cables and disconnect the strip from mains before cleaning.