Stroomkabel Kolink KKTP01V2 1,8 m – CEE7/7 naar C13, 250 V 10 A, zwart

Kolink KKTP01V2 is a 1.8 m mains power cable with a CEE7/7 (Schuko) plug on one end and an IEC C13 coupler on the other. Designed for connecting desktop PCs, monitors, printers and other devices equipped with an IEC C13 inlet to standard European wall sockets, it is rated for 250 V and 10 A. The cable has a 0.75 mm² conductor cross-section and a black PVC jacket that offers basic insulation and flexible routing for home and office environments.

Advantages

The cable provides a reliable, standardised connection between European mains outlets and IEC C13 devices. Its 1.8 m length balances reach and cable management for desk setups, while the 0.75 mm² conductor supports the specified 10 A current rating. The black outer jacket resists everyday wear and integrates unobtrusively into most workspaces.

Suitable for

• Connecting desktop computers and PC power supplies
• Powering monitors and multimedia displays
• Supplying printers, scanners and small office equipment
• Use in home offices, corporate desks and server rooms with standard IEC C13 devices

Key specifications

• Cable length: 1.8 m
• Plug type (mains): CEE7/7 (Schuko)
• Coupler type (device): IEC C13
• Rated voltage: 250 V
• Rated current: 10 A
• Conductor cross-section: 0.75 mm²
• Colour: black
• Jacket material: PVC

How to use

Insert the CEE7/7 plug into a compatible European wall socket and connect the IEC C13 coupler to the device’s power inlet until it seats securely. Ensure the connected device’s power requirements do not exceed the cable’s 250 V / 10 A rating. Route the cable to avoid sharp bends, pinch points and heat sources; keep connections dry and accessible for disconnection when needed.

Recommendations

Check device labels for voltage and current requirements before connection. For permanent or high-load installations, verify that the combined device current remains within the cable’s 10 A rating. Replace the cable if the jacket or connectors show visible damage.