SYNERGY21 LED Flex Strip COB - Super Warm Wit DC24V 40W IP67 + Sauna/Wellness 5m

The SYNERGY21 LED Flex Strip COB in Super Warm White is a high-performance, flexible lighting solution designed for demanding environments such as saunas, wellness areas, bathrooms, and outdoor wet zones. With a robust IP67 rating, this strip is fully protected against dust and temporary immersion in water, making it ideal for damp and wet locations. The COB (Chip-on-Board) technology ensures a uniform, glare-free light with a high CRI >90, rendering colors naturally. Operating at DC 24V, it delivers 40W total power (8W/m) and an impressive 3000 lumens (600 lm/m) over its 5-meter length. The strip is dimmable with a compatible dimmer, allowing you to adjust the ambiance to your preference. It features a 120° beam angle, 320 LEDs per meter, and can be cut at marked intervals for custom lengths. The included 3M adhesive backing simplifies installation on clean, dry surfaces. With an expected lifetime of 50,000 hours, this LED strip is a reliable and energy-efficient choice for both residential and commercial projects.

Advantages

Uniform, flicker-free light with COB technology; high CRI >90 for true color representation; IP67 waterproof for sauna, wellness, and outdoor use; dimmable for flexible lighting control; easy to cut and install with adhesive backing; long 50,000-hour lifespan reduces maintenance costs.

Suitable for

• Sauna and wellness areas
• Bathrooms and shower rooms
• Outdoor patios, decks, and gardens
• Kitchen under-cabinet lighting
• Commercial display and accent lighting

Key specifications

• Lighting Technology: COB LED
• Color Temperature: 2700K (Super Warm White)
• Operating Voltage: DC 24V
• Power Consumption: 40W total (8W/m)
• Luminous Flux: 3000 lm total (600 lm/m)
• IP Rating: IP67
• Strip Length: 5 meters
• Strip Width: 10 mm
• CRI: Ra >90
• Dimmability: Yes (with compatible dimmer)
• Beam Angle: 120°
• LED Density: 320 LEDs/m
• Cuttable: Yes, at marked intervals
• Adhesive Backing: Yes, 3M tape
• Expected Lifetime: 50,000 hours

Recommendations

For best performance, use with a constant voltage DC 24V power supply and a compatible PWM dimmer. Ensure the mounting surface is clean and dry before applying the adhesive tape. When cutting, seal the cut end with silicone to maintain IP67 protection.