VGA-kabel SAVIO Cl-202 1,8 m — VGA (D-Sub) naar VGA (D-Sub), zwart

SAVIO Cl-202 1.8 m VGA cable is a black VGA (D-Sub) to VGA (D-Sub) lead designed for analog video connections between computers, laptops, projectors, TVs and other legacy display devices. The cable has standard 15-pin VGA male connectors on both ends and supports bidirectional analog video transfer. Its 1.8 m length provides everyday reach for desktop setups, meeting rooms and home AV arrangements while the black jacket offers a neutral appearance that integrates with most equipment.

Advantages

The cable is fully shielded and fitted with two ferrite filters to reduce electromagnetic interference and preserve image stability. Nickel-plated VGA connectors and 30 AWG conductors provide reliable contact and consistent signal transmission. With an outer diameter of 5.5 mm the cable balances mechanical strength and flexibility for convenient routing behind furniture or equipment racks. The design supports simple plug-and-play use for devices with standard VGA ports.

Suitable for

Key specifications

How to use

Connect one VGA (D-Sub) male end to the VGA output of your computer, laptop, tuner or media device and plug the other male end into the VGA input on your monitor, projector or TV. Tighten the connector screws by hand to secure the connection and ensure stable contact. Select the appropriate input source on the display and, if necessary, adjust resolution and refresh rate in the source device settings to match the display's supported analog modes.

Recommendations

For best results, route the cable away from strong electrical noise sources such as power supplies, unshielded power cables or large motors. Avoid sharp bends and excessive pulling on the jacket; keep bend radius gentle to preserve the internal conductors. When using longer runs or high-resolution analog signals, verify display settings and cable termination to maintain image clarity.