3D-printfilament Creality Hyper PLA 1,75 mm 1 kg — Wild Blossom (meerkleurig, lange kleurverloop)

Creality Hyper PLA 1.75 mm 1 kg — Wild Blossom is a multicolour, long-gradient polylactic acid filament designed for FDM/FFF 3D printers. The filament on a 1 kg spool has a nominal diameter of 1.75 mm with tight tolerance to support stable extrusion and consistent layer deposition. Hyper PLA combines a fast-flowing formulation and rapid cooling to enable higher print speeds while maintaining dimensional accuracy and improved toughness for structural and decorative prints with smooth colour transitions.

Advantages

Hyper PLA is formulated for high fluidity and quick solidification, allowing print speeds significantly higher than standard PLA while preserving precision due to improved thermal stability. The material offers greater toughness and tensile performance compared with conventional PLA, which helps printed parts bear mechanical loads better. Uniform diameter control and neat winding reduce filament feed issues and tangles. The product is supplied in eco-friendly packaging and is broadly compatible with many FDM/FFF printers, particularly Creality models.

Suitable for

• Rapid prototyping where faster print times are needed
• Decorative and multicolour gradient figurines and models
• Functional parts and small mechanical components requiring higher toughness
• Visual concept models and display pieces with smooth colour transitions

Key specifications

• Material: Polylactic acid (PLA), multicolour long gradient
• Nominal diameter: 1.75 mm (diameter tolerance ±0.03 mm)
• Spool weight: 1 kg
• Recommended high-speed capability: supports fast printing thanks to high fluidity and rapid cooling
• Tensile modulus: 52.99 MPa
• Uniform winding to reduce tangling and ensure stable feeding
• Compatibility: compatible with most FDM/FFF 3D printers, optimized for Creality printers

How to use

Load the filament onto the spool holder ensuring the filament unwinds smoothly and feed it into the printer's extruder. Standard printing settings for PLA are a suitable starting point; adjust nozzle temperature, print speed and cooling settings to match the Hyper PLA characteristics. Because Hyper PLA has higher fluidity and faster cooling, increase print speed progressively while monitoring layer adhesion and dimensional accuracy. Use a heated bed if available and a clean build surface to improve first-layer adhesion; enable part cooling to support fast solidification and crisp detail for gradient-colour prints.

Recommendations

Begin with a nozzle temperature within the typical PLA range (185–220 °C) and a bed temperature around 40–60 °C, then fine-tune based on your printer and the Wild Blossom gradient behaviour. When increasing speed, confirm stable extrusion and adjust retraction settings to avoid stringing. Store the spool in a dry place or sealed bag with desiccant to maintain filament quality.