3D-printfilament Gembird ABS 1,75 mm geel 1 kg

Gembird ABS 3D printing filament, 1.75 mm diameter in yellow on a 1 kg spool is a thermoplastic material designed for FDM/FFF 3D printers that accept 1.75 mm ABS. The filament is formulated to offer improved melt behavior for higher-speed printing, making it suitable for fast printers including Bambu Lab, Creality K1(max), FF 5M(PRO) and Voron models, and it fits in the Bambu Labs Automatic Material System. It provides the standard mechanical properties of ABS—high strength and good toughness—while maintaining relatively low density for lighter large-volume prints. The package contains one spool with approximate spool height of 67 mm.

Advantages

This ABS filament is optimised for fast extrusion and improved melting, which supports printing in higher speed modes such as sport and ludicrous on compatible machines. It is compatible with a wide range of printer brands and CoreXY architectures, and offers a balance of strength and toughness for functional parts, prototypes and hobby models. The yellow colour provides consistent colour output for visible functional components or decorative prints.

Suitable for

• Functional prototypes and mechanical parts requiring impact resistance
• High-speed printing workflows on machines supporting fast ABS extrusion
• Hobby models and visible parts where yellow colour is desired
• Large-volume prints where lower material density helps reduce weight

Key specifications

• Material: ABS (acrylonitrile butadiene styrene)
• Diameter: 1.75 mm
• Net filament weight: 1 kg
• Colour: Yellow
• Spool height (approximate): 67 mm
• Compatibility: Designed for use with FDM/FFF 3D printers accepting 1.75 mm filament; suitable for CoreXY and many high-speed printers
• Designed for improved melting behavior to enable higher print speeds

How to use

Load the 1.75 mm ABS filament into any compatible FDM/FFF printer according to the printer manufacturer's loading instructions. Use a heated build plate and an appropriate nozzle temperature for ABS; adjust cooling and extrusion settings to match the printer and desired print speed. When printing at higher speeds, ensure the printer's extrusion system and hotend are rated for fast-flow printing and that the material path is free of obstructions. Store the filament in a dry environment or sealed container with desiccant when not in use to reduce moisture absorption.

Recommendations

Recommended starting settings: follow your printer's guidelines for ABS, typically using a heated bed and reduced part cooling. For high-speed printing, increase extrusion temperature and flow as needed while monitoring layer adhesion and surface quality. Use enclosure or controlled ambient temperature for better dimensional stability and reduced warping when printing larger or structural parts.