3M ATG 926 transparante transferfolie, 12 mm × 33 m, 0,13 mm

3M ATG 926 is a transparent adhesive transfer film on a roll, 12 mm wide and 33 m long with a 0.13 mm thickness. The product applies a thin, double-sided adhesive layer suitable for precise bonding of paper, card, photos and other light materials. The film is compatible with manual dispensing and ATG applicators, producing low-profile, virtually invisible joins for crafts, mounting and repair tasks.

Advantages

The adhesive transfer film provides a uniform, thin adhesive layer that reduces wrinkling and excess squeeze-out compared with liquid glues. Its transparent carrier and clear adhesive maintain the appearance of the bonded surfaces without visible seams. The roll format and moderate thickness offer convenient handling, consistent application across long runs, and minimal waste when used with an applicator.

Suitable for

Key specifications

How to use

Cut the required length of adhesive transfer film and apply it evenly to one surface using an ATG applicator or by hand, ensuring firm contact and avoiding air bubbles. Peel away the protective liner to expose the adhesive and press the second surface into place, applying even pressure to secure the bond. Allow a short period for the adhesive to conform and set; full handling strength is achieved rapidly for paper and light materials.

Recommendations

Store the roll in a cool, dry place away from direct sunlight and extreme temperatures. For best results, use on clean, dry, and oil-free surfaces. Test on a small sample if bonding delicate or easily marked materials. Use an appropriate applicator for consistent results on long runs and to reduce waste.