ABB S202M-C13 2-polige 13A C-karakteristiek installatieautomaat, 10kA schakelvermogen 2CDS272001R0134

Protect your electrical circuits from overload and short-circuit damage with the ABB S202M-C13 miniature circuit breaker. This 2-pole MCB is rated for 13 A with a C tripping characteristic, making it suitable for commercial and industrial applications where moderate inrush currents are expected. The 10 kA breaking capacity ensures reliable interruption of high fault currents, safeguarding wiring and connected equipment.

Who is it for

Electricians, panel builders, and maintenance professionals who need a dependable circuit protection device for distribution boards and control panels. It is ideal for protecting circuits supplying motors, transformers, and lighting systems with moderate surge currents.

Main features

• 2-pole design for phase and neutral switching
• C tripping characteristic (5-10 times rated current) for general applications
• 10 kA short-circuit breaking capacity (Icn) according to IEC/EN 60898-1
• Rated current 13 A, rated voltage 230/400 V AC
• DIN rail mounting (35 mm) for quick installation
• Screw terminals with large wiring capacity up to 35 mm² rigid
• Operating temperature range -25°C to +55°C
• Energy limiting class 3 for enhanced protection

Specifications

• Number of poles: 2
• Tripping characteristic: C
• Rated current: 13 A
• Rated short-circuit breaking capacity: 10 kA
• Rated voltage: 230/400 V AC
• Rated insulation voltage: 500 V
• Rated impulse withstand voltage: 4 kV
• Frequency: 50/60 Hz
• Energy limiting class: 3
• Degree of protection: IP20 (terminals), IP40 (enclosure with cover)
• Mounting type: DIN rail (EN 60715 TH35-7.5/TH35-15)
• Terminal type: screw terminals
• Terminal capacity rigid: 0.75 - 35 mm²
• Terminal capacity flexible: 0.75 - 25 mm²
• Tightening torque: 2.8 N·m
• Electrical endurance: 20000 cycles
• Mechanical endurance: 20000 cycles
• Ambient operating temperature: -25 to +55 °C
• Storage temperature: -40 to +70 °C
• Standards: IEC/EN 60898-1

Tips

Always verify that the short-circuit current at the installation point does not exceed 10 kA. Use appropriate cable sizes and tighten terminals to the specified torque to ensure reliable operation.