Ansmann 2S2P Li-Ion accupack 4x 18650 met kabel 7,2 V 6700 mAh (2447-3043-40)

This ANSMANN battery pack uses a 2S2P configuration of four 18650 lithium-ion cells, delivering 7.2 V and 6700 mAh without the weight or memory effect of older chemistries. It is supplied with open wire ends and a JST-XH balance connector, so it can be integrated into custom devices or replace packs in compatible equipment.

Highlights

• 2S2P arrangement: two cells in series and two in parallel for balanced voltage and capacity
• Integrated PCB protection against overcharge, over-discharge, short circuit and overcurrent
• Open wire ends for flexible connection, plus a 3-pin JST-XH balance connector
• Shrink-wrapped housing keeps the pack compact and lightweight

In daily use

The pack supports a maximum continuous discharge current of 13.4 A (2C) and can be charged at up to 6.7 A (1C). It operates in temperatures from -20 °C to +60 °C during discharge and 0 °C to +45 °C during charging, with a cycle life of more than 500 cycles to 80 % capacity.

Full specifications

• Battery chemistry: Lithium-Ion (Li-Ion)
• Nominal voltage: 7.2 V
• Capacity: 6700 mAh
• Energy: 48.24 Wh
• Cell configuration: 2S2P (2 series, 2 parallel)
• Number of cells: 4
• Cell size: 18650
• Integrated protection: Yes (PCB for overcharge, over-discharge, short circuit, overcurrent)
• Power connector type: Open wire ends
• Balance connector type: JST-XH (3-pin)
• Max. charge current: 6.7 A (1C)
• Max. discharge current: 13.4 A (2C)
• Operating temperature (charge): 0 °C to +45 °C
• Operating temperature (discharge): -20 °C to +60 °C
• Storage temperature: -20 °C to +35 °C
• Cycle life: >500 cycles (to 80 % capacity)
• Rechargeable: Yes
• Housing: Shrink wrap (blue)

Final note

ANSMANN's 2S2P pack is a practical power source for projects and replacements where a reliable 7.2 V Li-Ion battery with protection is required.