APC Power Cord Kit (6 stuks), vergrendeling, C13 naar C14, 0,6 m, rood

The APC AP8702S-WWX340 Power Cable is a 0.61 m red C13–C14 coupler cable designed for rack and equipment power distribution. Its compact length and clear red colour help identify power paths in dense server cabinets and network racks while providing a stable connection between compatible power inlets and outlets.

Advantages

This power cable offers a standard C13 to C14 coupler interface compatible with many IT devices and PDUs, in a 0.61 m length that reduces excess cable in racks. The red jacket improves visibility for easier troubleshooting and cable management. The construction is intended for reliable, everyday use in data centre and server-room environments.

Suitable for

• Connecting servers, switches or PDUs that use C13/C14 power connectors
• Power distribution in data centres and server rooms
• Short interconnections in dense rack environments or between adjacent equipment

When it may not be suitable

This 0.61 m cable is not suitable when longer reach is required—for example, when devices are far apart or when routing around obstacles. It is also not intended as a replacement for specialised or hardened outdoor power cabling and should not be used where specific environmental ratings or certifications are mandated.

Key specifications

• Connector A: C13 coupler
• Connector B: C14 coupler
• Cable length: 0.61 m
• Colour: Red
• Weight: 0.7 kg

How to use

Insert the C13 end into the device inlet and the C14 end into the PDU or power source inlet until each connector seats firmly. Ensure equipment is powered down or follow your site’s hot-swap procedures before connecting or disconnecting. Route the cable to avoid sharp bends and secure it to prevent strain on connectors.

What to consider before purchase

• Confirm the devices and PDUs use C13/C14 connectors
• Verify the 0.61 m length is sufficient for your rack layout
• Consider colour coding for your cable management practices

Recommendations

Use this red 0.61 m C13–C14 cable for short, visible power connections in rack environments; avoid over-bending and do not use it in locations that require weatherproof or specially rated cabling.