Audiokabel ShiverPeaks BS30461 0,2 m 6,35 mm 2xRCA zwart rood wit

The ShiverPeaks BS30461 is a short audio adapter cable measuring 0.2 m that connects a 6.35 mm male jack to two RCA female connectors. Constructed with copper conductors and nickel-plated contacts, the cable is intended to provide reliable analogue signal transfer between instruments, audio interfaces, mixers or amplifiers and consumer or professional RCA-equipped devices. Its black, red and white colour coding helps identify channels during setup.

Advantages

The compact 0.2 m length minimises signal loss and clutter when connecting nearby audio devices. Copper conductors provide good conductivity for clear analogue audio transmission while nickel-plated contacts resist corrosion and maintain consistent contact quality. Colour-coded connectors simplify left/right channel identification and the cable’s build supports common studio and stage routing needs without excess length.

Suitable for

• Connecting instruments or line outputs with a 6.35 mm jack to RCA inputs on mixers, receivers or recorders
• Short patching in studio desks, pedalboards or compact home audio setups
• Testing or routing signals during live sound checks and equipment configuration

Key specifications

• Cable length: 0.2 m
• Connector A: 6.35 mm male jack
• Connector B: 2 × RCA female
• Conductor material: copper
• Contact plating: nickel-plated contacts
• Product colours: black, red, white

How to use

Insert the 6.35 mm male plug into the instrument or line output jack and connect the RCA female ends to the corresponding RCA inputs on the target device, matching left and right channels by colour where applicable. Ensure devices are powered down or volume is reduced when connecting to avoid transient noise. After connection, power on devices and adjust levels as needed to achieve the desired signal balance.

Recommendations

For best results keep the cable length minimal and avoid tight bends at the connector ends. Use the provided colour coding to maintain correct channel orientation and inspect contacts periodically for oxidation; if intermittent noise appears, clean contacts or replace the cable to maintain sound quality.