Blindklinkmoer GESIPA St M6x9x15,5 kleine kop KS, klembereik 0,25–3,5 mm, 250-pack

Blind rivet nut GESIPA St M6x9x15.5 Small Head KS is a steel blind rivet nut engineered to provide a reliable internal M6 thread in thin or soft base materials. With a 9 mm body diameter and a 15.5 mm overall length, this small-head design enables fastening in confined or countersunk areas while accommodating grip thicknesses from 0.25 to 3.5 mm. Supplied as a pack of 250, these rivet nuts are intended for applications where installation from one side is necessary and a strong, reproducible threaded connection is required.

Advantages

The small head KS profile reduces protrusion on the installation side and is suitable for narrow installation spaces, while the steel construction ensures high tensile strength and secure thread retention. The specified grip range covers a variety of thin-sheet assemblies and allows consistent installation with standard blind rivet nut tools. Packaging in a pack of 250 supports efficient stock management and uninterrupted production or repair workflows.

Suitable for

Key specifications

How to use

Drill a hole matching the rivet nut body diameter in the workpiece, insert the rivet nut into the hole with the small head oriented to the installation side, and install using an appropriate blind rivet nut setting tool or nutsert tool. Apply steady pressure with the tool until the rivet nut deforms correctly and forms a secure flange against the backside of the material. After setting, check that the M6 thread is clear and ready for the intended fastener.

Recommendations

For reliable results use a tool and mandrel sized for M6 rivet nuts and verify hole diameter tolerance before installation. When fastening in softer substrates, consider backing or reinforcement to distribute load. Store the pack in a dry environment to avoid corrosion prior to use.