BlueOptics SFP-10GTP-BO netwerk-transceivermodule 1250 Mbit/s RJ-45

The BlueOptics SFP-10GTP-BO network transceiver module is a compact metal SFP form-factor device with an RJ-45 interface and a rated maximum data transfer rate of 1250 Mbit/s. Designed for insertion into compatible SFP ports, the module operates at a 3.3 V input voltage and weighs approximately 3 g. Its silver metal housing provides mechanical durability and helps with heat dissipation in typical networking environments.

Advantages

The module’s RJ-45 interface enables direct connection to copper Ethernet infrastructure without the need for additional adapters. Its small, metal SFP form factor makes it suitable for dense installations and contributes to mechanical robustness. Low weight and a standard 3.3 V supply allow straightforward integration into network switches, routers and other devices that accept SFP transceivers. The product combines a compact footprint with clearly stated electrical and physical characteristics useful for system planning.

Suitable for

Key specifications

How to use

Ensure the host device supports SFP modules with an RJ-45 interface and the stated electrical characteristics. Power off the target device or follow hot-swap guidelines provided by the device manufacturer, then insert the module into a compatible SFP slot until it latches. Connect an appropriate copper Ethernet cable to the RJ-45 port and configure the host network device to recognise the transceiver and set the desired link parameters. Verify link status and data rate through the host device management interface.

Recommendations

Verify compatibility with your switch or router vendor documentation before installation and confirm that the host device supports the module’s data rate and SFP RJ-45 interface. Use shielded or unshielded copper cabling as required by the network environment and maintain proper ventilation around densely populated SFP slots to avoid overheating.