BlueOptics SFP-BXU34-20KM-AO-BO netwerk-transceivermodule glasvezel 1250 Mbit/s

The BlueOptics SFP-BXU34-20KM-AO-BO network transceiver module is a compact fiber optic SFP device designed for single-port uplink and access applications. Supporting a maximum data transfer rate of 1250 Mbit/s, the module comes in a durable metal housing with a silver finish and a light weight of 20 g. With a mean time between failures (MTBF) of 1,000,000 hours, it is intended for deployment where predictable uptime and modest bandwidth per link are required.

Advantages

This SFP transceiver provides a standard SFP interface that fits a wide range of switches and routers that accept hot-pluggable SFP modules. The metal housing offers mechanical protection and thermal conduction while the compact form factor enables high port density. Rated for 1250 Mbit/s, the module supports common fiber network setups over longer distances when paired with compatible single-mode fiber and optics. Low weight and a standard mechanical profile simplify handling and installation.

Suitable for

Key specifications

How to use

Ensure the host device supports SFP transceivers and a data rate of 1250 Mbit/s. Power down the network device or follow the manufacturer's hot-swap procedure before inserting the module into an empty SFP slot; align the module with the slot and push until it latches. Connect the appropriate fiber cable (matching single-mode or multimode as required by your network and optics) to the transceiver, observing correct polarity. Verify link status via the host device interface and monitor for correct optical levels and data throughput.

Recommendations

Use compatible single-mode fiber and matching optical components for long-distance links. Avoid excessive bending or stress on the fiber cable near the connector and keep dust caps on the transceiver when not connected. For optimal reliability, follow the host equipment vendor guidance for supported transceiver models and firmware compatibility.