BlueOptics SFP-P-5BDH-BO netwerk-transceivermodule glasvezel 10000 Mbit/s SFP+ zilver

The BlueOptics SFP-P-5BDH-BO is a fiber optic SFP+ transceiver module designed for high-speed data transfer up to 10000 Mbit/s. Housed in a durable silver metal casing and weighing only 3 g, it operates at an input voltage of 3.3 V and uses an SFP+ interface for use in compatible network equipment. The module supports single-mode fiber with an LC simplex connector and is suitable for point-to-point optical links where reliable 10G connectivity is required.

Advantages

This transceiver provides a compact, industry-standard SFP+ form factor that fits a wide range of networking devices. Its metal housing offers mechanical robustness and heat dissipation appropriate for continuous operation. With a 3.3 V operating voltage and a low weight, the module is simple to integrate into switches, routers and other hardware that accept SFP+ optics. The design supports long-distance single-mode fiber links using separate transmit and receive wavelengths for simultaneous bidirectional communication.

Suitable for

• 10G Ethernet uplinks and inter-switch connections
• Fiber connections between routers, switches and storage systems
• High-speed links in data centres and enterprise networks
• Point-to-point single-mode optical links up to several kilometers

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Connector type: LC simplex (single-mode)
• Operating voltage: 3.3 V
• Product colour: Silver
• Weight: 0.003 kg

How to use

Install the BlueOptics SFP-P-5BDH-BO by inserting the module into an SFP+ slot on compatible network equipment until it latches. Connect an appropriate single-mode LC patch cable between transceivers or to a patch panel to establish the optical link. Ensure that the host device supports SFP+ modules and the required transmission protocol prior to installation. After physical installation, verify link status and speed using the host device management interface.

Recommendations

For optimal performance, use single-mode LC simplex patch cords of suitable quality and verify compatibility with the host hardware. Confirm support for the transceiver's wavelengths and any digital diagnostic features on the device to enable monitoring. Handle the optical ports with protective caps when not connected and avoid bending fiber cables beyond their specified radius to maintain signal integrity.