Bosch 2 608 634 243 decoupeer-/figuurzaag-/reciprozaagblad decoupeerzaagblad bimetaal 5 st.

Jigsaw Blade Bosch 2 608 634 243 is a T 344 DF bi-metal (BIM) blade engineered for sawing hardwood, softwood and various panels including laminated boards. With a total length of 152 mm and 4 mm tooth spacing, it provides precise, efficient cuts for thicknesses from 5 mm up to 100 mm and can also be used on coarser wood under 100 mm.

Advantages

The blade is manufactured from bi-metal (BIM) for improved wear resistance and longer life. Its side-set, sharpened tooth design delivers fast cutting performance and clean edges in both hardwood and laminated panels. The T 344 DF geometry is suitable for straight, controlled cuts across a range of panel and solid wood thicknesses.

Suitable for

Key specifications

How to use

Install the blade into a compatible jigsaw following the tool manufacturer’s instructions and ensure the T-shank or fitting matches the saw. Secure the blade firmly and set the correct speed for the material: lower speeds for laminates to reduce chipping, medium to higher speeds for solid wood. Make steady, controlled feed rates to maintain straight cuts; avoid excessive lateral force that can damage the teeth.

Recommendations

For best results on laminated panels, use a fine feed and consider placing painter’s tape along the cut line to minimise chipping. Replace the blade when cutting quality deteriorates or if excessive wear is visible.