Bosch 2 608 650 414 decoupeer-/figuurzaag-/reciprozaagblad

The Bosch 2 608 650 414 jigsaw blade M 1131 L is made of high carbon steel (HCS) and features a side-set, ground tooth geometry with very sharp teeth. With a total length of 235 mm and a thickness of 0.9 mm, this blade is intended for cutting coarse wood, firewood, green wood and branches; it is suitable for gardening and other outdoor wood-cutting tasks.

Advantages

The HCS material provides a balance of cutting performance and resilience for wood applications. Side-set, ground teeth with a coarse 5 mm tooth spacing (5 TPI) enable fast, aggressive cuts in thicker wood while helping to reduce binding. The blade’s 235 mm length offers extended reach for deeper cuts and pruning tasks.

Suitable for

• Coarse wood and logs (15–150 mm, free of nails)
• Pruning and cutting green wood (up to 150 mm)
• Firewood preparation and branch removal
• General gardening and outdoor woodwork

Key specifications

• Type: M 1131 L
• Material: HCS (high carbon steel)
• Tooth design: side set, ground, very sharp teeth
• Tooth spacing / TPI: 5 mm / 5 TPI
• Total length: 235 mm
• Thickness: 0.9 mm

How to use

Fit the blade into a compatible jigsaw according to the tool manufacturer’s instructions, ensuring the blade is securely locked. Use the blade for straight or curved cuts in coarse and green wood, applying steady feed pressure and allowing the blade to cut without forcing. For pruning, cut branches progressively from the outer section toward the stem to maintain control.

Recommendations

Use this HCS jigsaw blade only on wood free of nails and metal contaminants. For prolonged blade life, avoid excessive lateral force and allow the blade to cool between prolonged cutting sessions. Replace the blade when cutting quality decreases or teeth become visibly worn.