Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

Bosch GCL 2-15 G lijn-/puntlaser 10 m 500-540 nm (< 10 mW)

Bosch GCL 2-15 G lijn-/puntlaser 10 m 500-540 nm (< 10 mW)
Bosch GCL 2-15 G lijn-/puntlaser 10 m 500-540 nm (< 10 mW)
Bosch GCL 2-15 G lijn-/puntlaser 10 m 500-540 nm (< 10 mW)
Bosch GCL 2-15 G lijn-/puntlaser 10 m 500-540 nm (< 10 mW)
279,26 €
The Bosch GCL 2-15 G is a compact line/point level that projects both a horizontal and a vertical green laser line plus two laser points for alignment tasks. Designed for indoor use, it provides a maximum working range of 10 m and a levelling accuracy of ±0.3 mm/m. The device features a self-levelli... Lees meer
Voorraad 3 Code 353701 Merk BOSCH Model 0 601 066 J00 Garantie 2 jaar
CategorieLaserwaterpassen

Bezorging & retourneren

Verwachte bezorgdatum vrijdag 13 november
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

The Bosch GCL 2-15 G is a compact line/point level that projects both a horizontal and a vertical green laser line plus two laser points for alignment tasks. Designed for indoor use, it provides a maximum working range of 10 m and a levelling accuracy of ±0.3 mm/m. The device features a self-levelling mechanism with a working tilt range of ±4° and runs on standard AA batteries, offering up to 22 hours of continuous operation. Weighing approximately 490 g and equipped with a tripod thread (1/4", 5/8"), the GCL 2-15 G is intended to simplify precise alignment, transfer of levels and layout work in construction and installation jobs.

Advantages

The Bosch GCL 2-15 G combines a clear green laser projection with compact dimensions and low weight for easier handling on job sites. Its high levelling accuracy of ±0.3 mm/m ensures precise alignment, while the self-levelling system with ±4° range speeds up setup. Long battery life—up to 22 hours on AA batteries—reduces interruptions during longer tasks. The integrated tripod thread increases mounting flexibility and the dual-function projection (lines and points) covers a range of alignment and transfer applications without the need for separate tools.

Suitable for

  • Interior alignment of walls, windows, doors and timber frames
  • Installing kitchen units, cabinets and shelving
  • Tiling and floor layout where level and plumb references are required
  • Electrical and plumbing runs requiring accurate transfer points
  • General construction and renovation tasks up to 10 m

Key specifications

  • Laser colour: green
  • Projection: horizontal line, vertical line, two points
  • Maximum range (room conditions): 10 m
  • Levelling accuracy: ±0.3 mm/m
  • Self-levelling range: ±4°
  • Power supply: AA batteries
  • Operating time: up to 22 hours
  • Weight: approx. 490 g
  • Tripod connection: 1/4" and 5/8" thread

How to use

Place the Bosch GCL 2-15 G on a stable surface or mount it on a tripod using the included thread. Switch the unit on and allow the self-levelling mechanism to adjust; the device will automatically level within the ±4° tilt range. Select the required projection mode (line, cross-line or points) and position the laser so the projected reference aligns with your target. For tasks beyond the self-levelling range, manually adjust the instrument until the projected line is straight. Replace batteries as needed to maintain full output; standard AA batteries provide up to 22 hours of operation under typical conditions.

Recommendations

Use the green laser in indoor environments with moderate lighting for best visibility. For extended outdoor use or longer distances, consider additional visibility aids or a detector compatible with green lasers. Store the device in a dry, dust-free place and remove batteries if the instrument will be unused for extended periods to avoid leakage and corrosion.

Belangrijkste kenmerken
  • Interior alignment of walls, windows, doors and timber frames
  • Installing kitchen units, cabinets and shelving
  • Tiling and floor layout where level and plumb references are required
  • Electrical and plumbing runs requiring accurate transfer points
  • General construction and renovation tasks up to 10 m
  • Laser colour: green
  • Projection: horizontal line, vertical line, two points
  • Maximum range (room conditions): 10 m
  • Levelling accuracy: ±0.3 mm/m
  • Self-levelling range: ±4°
  • Power supply: AA batteries
  • Operating time: up to 22 hours
  • Weight: approx. 490 g
  • Tripod connection: 1/4" and 5/8" thread
Specificaties
Aantal laserlijnen
2
Aantal laserpunten
2
Aantal meegeleverde batterijen
3 pc(s)
Aantal ondersteunde batterijen
3
Batterij inbegrepen
Yes
Batterijspanning
1.5 V
Bedrijfstemperatuur (T-T)
-10 - 50 °C
Gebruiksduur
22 h
Gewicht
490 g
International Protection (IP)-code
IP54
Kleur van de laserstraal
Green
Laserdiode
500-540 nm (< 10 mW)
Laserklasse
2
Maximaal bereik
10 m
Maximaal bereik (met ontvanger)
15 m
Nivelleernauwkeurigheid (±)
0.3 mm/m
Opslagtemperatuur (T-T)
-20 - 70 °C
Productkleur
Black, Blue
Richting lichtbundel
Horizontal/Vertical
Statiefmontage ondersteund
Yes
Statiefschroefdraad
1/4,5/8"
Stroombron
Battery
Type
Line/Point level
Type batterij
AA
Zelfnivelleerbereik (±)
4°
Zelfnivellerend
Yes

Handleiding

Document openen
Prijsverloop van de afgelopen 6 maanden
Bosch GCL 2-15 G lijn-/puntlaser 10 m 500-540 nm (< 10 mW)
Actueel
279,26 €
Laagste
279,26 €
Hoogste
279,26 €
Wijziging 24 uur
0,00 €   0%
Week
0,00 €   0%
Maand
0,00 €   0%

Review schrijven

Beoordeling *
Je naam wordt openbaar getoond – je mag ook een bijnaam gebruiken. We nodigen kopers uit om reviews te schrijven. We controleren reviews vóór plaatsing en plaatsen ook kritische reviews.

Meer BOSCH producten in deze categorie

Populaire producten in deze categorie

Verkoper: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vilnius, Litouwen · Bedrijfsnummer 303192950 · Btw-nummer LT100008198612 · Verzending vanuit de EU (Litouwen)
WhatsApp
Messenger
Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.
Alle categorieën