Coaxkabel ShiverPeaks 7,5 m F-type

The ShiverPeaks 7.5m F-type coaxial cable provides a straightforward solution for transmitting RF signals between equipment. With two F-type connectors and a 7.5 metre length, this coaxial cable is intended for stable connections between TVs, satellite receivers, set-top boxes and other audio-visual devices. The cable construction balances flexibility and shielding to maintain signal integrity over the run.

Advantages

This ShiverPeaks coaxial cable features standard F-type screw connectors on both ends for secure mechanical and electrical contact. The 7.5m length allows flexible placement of connected devices without the need for improvised extensions. The cable is designed to reduce signal loss and interference compared with unshielded alternatives, providing consistent reception quality for terrestrial and satellite signals when properly installed.

Suitable for

• Connecting a television to an aerial or wall socket
• Linking satellite receivers or set-top boxes to a dish or multiswitch
• Extending existing coaxial runs in home AV setups
• Temporary or semi-permanent installations where a 7.5m length is required

Key specifications

• Cable type: coaxial with F-type connectors
• Connector type: F-type male to F-type male (screw)
• Length: 7.5 metres
• Intended signal types: RF for TV, satellite and terrestrial broadcasts
• Construction: shielded coaxial conductor designed to minimize interference and signal loss

How to use

Ensure both devices are turned off before connecting to avoid shorting or noise. Thread each F-type connector onto the matching female socket by hand until snug; do not overtighten with tools. Route the cable to avoid sharp bends and sources of strong electrical interference; keep the run as direct as practical. After connection, power on the equipment and perform any necessary channel or signal scans on the TV or receiver to confirm reception quality.

Recommendations

For optimal signal quality, avoid running the cable parallel and in close proximity to mains power cables or large electrical appliances. Use the 7.5m length to place sensitive receivers away from interference sources, and inspect connectors periodically for corrosion or loose threads to maintain reliable performance.