CORSAIR Vengeance RGB DDR5 8GB 5200 MT/s (1x8GB) CL40 module

Description: CORSAIR VENGEANCE RGB DDR5 8GB (1 x 8GB) DDR5 5200 CL40-40-40-77 1.25V Intel XMP - BLACK CORSAIR VENGEANCE RGB DDR5 memory delivers DDR5 performance, higher frequencies, and greater capacities optimized for Intel motherboards while lighting up your PC with dynamic, individually addressable ten-zone RGB lighting. Tightly screened high-frequency memory chips enable faster processing, rendering, and buffering than ever, with onboard voltage regulation for easy, finely controlled overclocking. Take control with CORSAIR iCUE software and enable RGB lighting customization, real-time frequency monitoring, onboard voltage regulation, and Intel XMP 3.0 profile customization. A custom PCB provides superb signal quality for high performance and stability on the latest Intel DDR5 motherboards. For cutting-edge DDR5 performance with mesmerizing RGB lighting, VENGEANCE RGB DDR5 lights the way. Welcome to the Cutting-Edge of Performance: Push the limits of your system like never before with CORSAIR DDR5 memory, unlocking even faster frequencies, greater capacities, and higher CPU processing. Dynamic Ten-Zone RGB Lighting: Illuminate your system with ten individually addressable, ultra-bright RGB LEDs per module, encased in a panoramic light bar for vivid RGB lighting from any viewing angle. Onboard Voltage Regulation: Enables easier, more finely-tuned, and more stable overclocking through CORSAIR iCUE software than previous generation motherboard control. Custom Intel XMP 3.0 Profiles: Customize and save your own XMP profiles via iCUE to tailor performance by app or task for greater efficiency. Create and Customize: Choose from dozens of preset lighting profiles, or create your own in iCUE. Maximum Bandwidth and Tight Response Times: Optimized for peak performance on the latest Intel DDR5 motherboards. Custom Performance PCB: Provides the highest signal quality for the greatest level of performance and stability. Tightly Screened Memory: Carefully screened memory chips for extended overclocking potential. Powerful CORSAIR iCUE Software: Dynamic RGB lighting control synchronized across your entire iCUE setup, real-time temperature and frequency readings, onboard voltage regulation, and custom XMP profiles. Stylish Solid Aluminum Heatspreader: Efficiently conducts heat away from your memory, with refined VENGEANCE styling to fit the look of modern systems. Limited Lifetime Warranty: For complete peace of mind. | Memory type: DDR5 | Total memory capacity: 8 | Memory bus frequency: 5200 MHz | Number of memory cards in set: 1 | CAS Latency: CL40 | ECC support: No | Radiator: Yes | Other features: Voltage: 1.25 V Pin Out: 288 Intel XMP 3.0 Compatibility: Intel 600 Series, Intel 700 Series, Intel 800

How to use

Power off the computer and disconnect the power cable before installing the module. Open the system case and locate an available DDR5 DIMM slot on the compatible motherboard. Align the notch on the module with the slot key, insert the module at a slight angle and press down evenly until the side latches click into place. After installation, reconnect power and start the system. Enter the motherboard BIOS/UEFI to verify that the module is recognized and operating at the expected 5200 MT/s; enable any XMP or EXPO-style profile if supported and required to run at the rated speed. For RGB lighting control, install the motherboard RGB software or CORSAIR iCUE to configure lighting effects if desired.

Recommendations

Install modules in matched pairs if you require dual-channel memory bandwidth; using a single module will operate in single-channel mode. When planning system memory capacity for demanding applications, consider adding additional modules to achieve higher total capacity and improved parallel throughput. Consult the motherboard manual for supported DDR5 speeds, slot population rules and BIOS settings before enabling overclocking or custom voltage adjustments.