CyberPower PR1500ERT2UC noodstroomvoorziening (UPS) line-interactive 1,5 kVA 1500 W 10 AC-uitgangen

CyberPower PR1500ERT2UC is a line-interactive UPS with 1.5 kVA (1500 W) capacity and 10 AC outlets, designed for rackmount or tower installation. It provides stabilized pure sine wave output and Automatic Voltage Regulation (AVR) to protect home theatre systems, multimedia devices, IT equipment, NAS/storage, telecom and networking devices, computers, workstations, and surveillance systems. The unit uses sealed lead-acid batteries and includes hot-swappable battery packs and Battery Management Technology for extended battery life. Typical backup time is approximately 6 minutes at full load and 18.6 minutes at half load.

Advantages

The UPS delivers a pure sine wave output with an output power factor of 1, enabling support for more critical loads compared with many conventional UPS models. Line-interactive topology with AVR stabilizes voltage without switching to battery for minor fluctuations. Two-phase battery charging accelerates recharge while maintaining safety. Hot-swappable battery packs allow maintenance without powering down connected equipment. A rotatable multi-functional matrix LCD provides clear status information and easy configuration.

Suitable for

• Rackmount or tower installations in server rooms and network closets
• Protecting servers, NAS/storage devices and workstations
• Powering networking, telecom and surveillance equipment
• Home theatre systems and multimedia setups
• Desktop computers and critical office devices

Key specifications

• Model: CyberPower PR1500ERT2UC
• Output power: 1500 W
• Output power capacity: 1.5 kVA
• AC outlets: 10
• Battery technology: Sealed Lead Acid (SLA)
• Typical backup time: ~6 min at full load, ~18.6 min at half load
• Topology: Line-interactive with AVR
• Output waveform: Pure sine wave
• Output power factor: 1
• USB ports: 1 × USB 2.0
• Weight: 32 kg
• Colour: Black
• Form factor: Rackmount / tower, metal chassis

How to use

Install the unit in a compatible rack or place it as a tower on a stable surface. Connect critical equipment to the UPS AC outlets and plug the UPS into a grounded mains outlet. Use the LCD to configure operation parameters and monitor battery and load status. For longer runtime, connect additional compatible battery packs if supported. Follow the included user manual for communications setup via the USB 2.0 port to enable graceful shutdown and monitoring from a connected computer.

Recommendations

Place the UPS in a well-ventilated area away from heat sources and moisture. Periodically check battery status on the LCD and schedule battery replacement according to the manufacturer’s guidance. Use hot-swap battery packs for maintenance when continuous operation of connected equipment is required.