D-SUB-kabel ShiverPeaks 25-polig stekker-naar-stekker, 7 m lengte

The ShiverPeaks D-SUB Cable 25-pin Male-to-Male, 7 m length is a shielded connector cable for devices with standard 25-pin D-sub interfaces. It is intended for wired signal connections between equipment such as industrial controllers, measurement instruments and legacy computer ports where a 25-pin D-sub mating is required. The 7 metre length provides extended reach while retaining the familiar D-sub form factor used in many serial and parallel interconnection scenarios.

Advantages

The cable features a 25-pin male-to-male configuration that matches common D-sub serial and parallel pinouts, enabling direct device-to-device connections without adapters. A seven-metre length reduces the need for intermediate couplers or long routing of shorter cables. The cable’s construction supports reliable signal transmission for control, measurement and data lines in systems that rely on traditional D-sub connectors.

Suitable for

• Connecting industrial controllers, PLCs and automation equipment with 25-pin D-sub ports
• Linking measurement instruments and laboratory devices that use D-sub interfaces
• Restoring connections to legacy computer serial/parallel ports or specialized hardware

Key specifications

• Connector type: 25-pin D-sub, male-to-male configuration
• Cable length: 7 m
• Compatible interfaces: standard 25-pin serial and parallel D-sub connections
• Application: wired signal transmission for control, measurement and legacy data ports

How to use

Align each 25-pin male connector with the corresponding female D-sub port on the devices and press gently until the connectors seat. Secure any fastening screws if present to prevent movement and ensure stable contact. Route the 7 m cable to avoid sharp bends, pinching or electromagnetic interference sources. Test the connection with the host equipment to confirm correct signal transmission and address any pinout-specific configurations in the connected devices.

Recommendations

For reliable long-term operation, avoid tight cable bends and strain on connector ends, keep the cable away from high-power cables to reduce interference, and verify device pinouts before use to ensure compatibility with the 25-pin D-sub wiring.