Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

Dekalin Dekasyl MS-2 6251812 multifunctionele lijm en kit grijs 290 ml

Dekalin Dekasyl MS-2 6251812 multifunctionele lijm en kit grijs 290 ml
Dekalin Dekasyl MS-2 6251812 multifunctionele lijm en kit grijs 290 ml
26,71 €
PDF
PDF
Voorraad 71 Code 4528515 Model 6251812 Garantie 2 jaar

Bezorging & retourneren

Verwachte bezorgdatum donderdag 26 november
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

Omschrijving

Dekasyl MS-2 is a multifunctional adhesive and sealant suitable for creating elastic connections between components where high adhesive strength is also required.

  • UV and ageing resistant
  • Neutral, odourless and fast curing

Dekasyl MS-2 from Dekalin (MPN 6251812) is a multifunctional adhesive and sealant. It is a good compromise between adhesive and sealant for demanding work. The elastic adhesive and sealant is suitable for creating elastic connections between components where high adhesive strength is also required. Application on glass, side skirts and wheel arch liners requires no prior surface treatment. Overpainting is possible after skin formation.

  • Areas of application
  • Elastic connections and seals in caravan and motorhome construction
  • Bonding roofs on buses, caravans and motorhomes
  • Bonding edge profiles of trailers with aluminium or polyester
  • Bonding polyester parts with metal frames
  • Bonding floor systems
  • Sealing weld seams
  • Properties
  • Free of solvents, isocyanate and PVC
  • Very good UV and ageing resistance

Generally good adhesion without primer on various substrates, e.g. Dekasyl MS-2 can be used as a sealant for PVC floor coverings

  • Permanently elastic in the temperature range from -40°C to +120°C

Can be overpainted after skin formation (wet on wet), this generally does not affect curing

Compatible with most industrial coating or painting systems, both alkyd resin and dispersion paints

  • Adhesion

In general, Dekasyl MS-2 adheres well without primer to clean, dry, dust- and grease-free substrates made of aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder-coated metal, most painted metal surfaces, glass, PVC, polyester (GRP), painted and varnished wood, etc. No adhesion without pretreatment on polyethylene, polypropylene and Teflon®. If high adhesion is required in cases of high thermal or physical stress, especially in humid environments, the use of a primer is recommended. For properties on substrates not mentioned and further information, please contact Dekalin.

  • Processing

Dekasyl MS-2 can be easily processed with a hand or air pressure gun at temperatures from +5°C to +35°C. For sealing, Dekasyl MS-2 should be further processed or smoothed within 10 minutes (at 20°C/50% relative humidity) with a spatula or putty knife previously dipped in mild soapy water. Avoid getting soapy water between the joint sides and the sealant, as this leads to a loss of adhesion. For bonding, the substrates must be joined within 15 minutes (at 20°C/50% relative humidity) after applying Dekasyl MS-2. The higher the temperature, the shorter the processing time! Generally, an adhesive layer of 2 mm is recommended if similar materials (with similar strength) are to be bonded. The greater the difference in thermal expansion, the thicker the adhesive layer should be. Further information on this is available from Dekalin. At a temperature of 20°C and a relative humidity of 50%, Dekasyl MS-2 can be overpainted with most industrial paints after just 10 minutes. The best possible adhesion of paint layers is achieved when the paint is applied 4 hours after application of Dekasyl MS-2. Clean tools or remove uncured residues of Dekasyl MS-2 with a clean, colourless cloth soaked in acetone or MEK (it is recommended to check beforehand whether the surface is attacked by these cleaners).

  • 1x Dekalin Dekasyl MS-2, 290 ml cartridge, grey

Specificaties

Specificaties
Capaciteit
290 ml
Categorie
Universele lijmen
EAN
4046085625185
Geschikt voor glas
Glas
Geschikt voor glasvezel
Polyester (GRP)
Geschikt voor hout
Painted and lacquered wood
Geschikt voor kunststof
PVC
Geschikt voor metaal
Aluminium, stainless steel, galvanized steel, zinc, copper, brass
Materiaal onderstel
MS Polymer
Merk
Dekalin
Model
6251812
MPN
6251812
Productkleur
Grijs
Producttype
Adhesive and sealant
Snel drogend
Fast curing
Stof
MS Polymer
Technische kenmerken
Solvent-, isocyanate- and PVC-free
Temperatuurbestendigheid
-40°C to +120°C
Prijsverloop van de afgelopen 6 maanden
Dekalin Dekasyl MS-2 6251812 multifunctionele lijm en kit grijs 290 ml
Actueel
26,71 €
Laagste 7 d
26,71 €
Hoogste 7 d
26,71 €
Wijziging 24 uur
0,00 €   0%
Wijziging 7 d
—   
Wijziging 30 d
—   

Review schrijven

Beoordeling *
Je naam wordt openbaar getoond – je mag ook een bijnaam gebruiken. We nodigen kopers uit om reviews te schrijven. We controleren reviews vóór plaatsing en plaatsen ook kritische reviews.

Meer DEKALIN producten in deze categorie

9

Populaire producten in deze categorie

7
Verkoper: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litouwen · Bedrijfsnummer 303192950 · Btw-nummer LT100008198612 · Verzending vanuit de EU (Litouwen)
WhatsApp
Messenger
Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.
Alle categorieën