DeLOCK 64344 interne M.2-adapter stekker zwart 22x80x5mm

The DeLOCK 64344 Internal M.2 Adapter converts an M.2 Key M slot into a Key E slot, allowing installation of M.2 Key E modules that use USB or PCIe signalling. The adapter has a compact, low-profile form factor with dimensions of 22 x 80 x 5 mm and a male M.2 host connector for internal mounting.

Advantages

This internal adapter enables compatibility between M.2 Key M sockets and Key E modules, supporting both USB and PCIe signal transfer where the motherboard and module provide the matching interfaces. Its small dimensions and male connector simplify installation in systems with limited space.

Suitable for

• Installing M.2 Key E wireless or communication modules into systems with M.2 Key M sockets
• Upgrading compact PCs, embedded systems or industrial boards to add Wi‑Fi/BT or other Key E cards
• Testing or prototyping M.2 Key E modules in a host with only Key M slots

Key specifications

• Brand: DELOCK
• Model / MPN: 64344
• EAN: 4043619643448
• Form factor: Internal M.2 adapter, male host connector
• Slot conversion: M.2 Key M to M.2 Key E
• Signal support: USB and PCIe (depends on motherboard/module)
• Dimensions: 22 x 80 x 5 mm
• Colour: Black

How to use

Power off the system and remove any covers to access the M.2 Key M slot. Carefully insert the DeLOCK 64344 adapter into the M.2 Key M socket with the correct orientation and secure it according to your motherboard’s mounting instructions. Fit the M.2 Key E module into the adapter and fasten with the appropriate screw. Reassemble the system and power it on; install any required drivers or firmware so the operating system recognises the installed module.

Recommendations

Confirm that the motherboard provides the necessary USB or PCIe lanes to the M.2 Key M slot before installing a Key E module. Use appropriate ESD precautions during installation and avoid forcing the adapter into the slot if it does not align smoothly.