DeLOCK 95272 Interne netwerkkaart 2500 Mbit/s bedraad M.2 Ethernet

The DeLOCK 95272 Internal Network Card provides a high-speed wired Ethernet connection via an M.2 interface, adding one 2.5 Gigabit LAN port that can be routed to the slot bracket. It supports NBASE-T technology to achieve higher-than-gigabit speeds over conventional network cabling, with automatic selection of the optimal transmission rate.

Advantages

The card delivers up to 2500 Mbit/s throughput over a standard Ethernet connection and is compatible with common IEEE 802.3 networking standards. Its M.2 form factor enables internal installation in compatible desktop systems while the bracketed LAN port allows convenient external access. NBASE-T support ensures backward compatibility with 1 Gbps and 100 Mbps networks and automatic link negotiation for the best available speed.

Suitable for

Key specifications

How to use

Install the module into a compatible M.2 slot on the motherboard, secure it according to the chassis and motherboard instructions, and route the LAN connector to the slot bracket so the port is accessible from the rear of the PC. Connect a compatible Ethernet cable to the bracketed LAN port and configure network settings in the operating system. The interface will negotiate the optimal speed automatically via NBASE-T.

Recommendations

The best performance is achieved with quality Cat5e or Cat6 cables and a network switch or router that supports 2.5 Gbps where possible. Ensure the motherboard M.2 slot supports the required keying and bandwidth for PCIe-based network modules before installation.