DisplayPort-naar-DVI-D-kabel VALUE 11995608 1,5 m

The VALUE 11995608 is a 1.5 m DisplayPort to DVI-D cable designed for reliable, high-quality video transmission between a DisplayPort source and a DVI-D display. The cable is halogen-free, flame retardant and produces low smoke. It features a DisplayPort plug on one end and a single-link DVI-D connector on the other, with a lightweight construction of approximately 130 g for easy handling and installation. Note: the cable works in one direction only — the DisplayPort plug must be connected to the source device (for example a graphics card).

Advantages

This DisplayPort to DVI-D cable provides stable digital video transfer with minimal signal loss and a compact, lightweight design for convenient routing and installation. Constructed from halogen-free, flame-retardant materials, it meets safety considerations and reduces smoke generation in case of fire. The single-direction connection ensures correct signal flow from source to display.

Suitable for

• Connecting a computer graphics card (DisplayPort) to a monitor or projector with a DVI-D input
• Office workstations requiring a reliable digital video link
• Presentations and classroom setups with DVI-D displays

Key specifications

• Length: 1.5 m
• Connector A: DisplayPort plug
• Connector B: DVI-D (single-link)
• Weight: approx. 130 g
• Directional: DisplayPort → DVI-D only
• Safety: halogen-free, flame retardant, low smoke
• Brand: VALUE
• MPN: 11.99.5608
• EAN: 7611990197224

How to use

Plug the DisplayPort end into the source device (for example the graphics card or laptop DisplayPort output) and connect the DVI-D end to the display device (monitor or projector). Ensure both devices are powered off when connecting or disconnecting the cable. After connection, power on the display and source device; configure the display settings on the source if necessary to set the desired resolution and refresh rate. Remember the cable only transmits from DisplayPort to DVI-D, not the other way around.

Recommendations

The cable is intended for digital video transmission only; it does not carry audio. For best results, avoid sharp bends and keep the cable away from strong electromagnetic sources. Verify device compatibility with single-link DVI-D to ensure the required resolution is supported.