Dompelpomp Makita PF1110

The Makita PF1110 submersible pump is built for efficient water removal in domestic and light professional environments. With a pumping capacity of 15,000 l/h and an 1,100 W motor, it handles rapid drainage tasks while allowing operation down to water depths of 5 cm and safe immersion to 5 m. The pump is compact and lightweight at 5.9 kg, designed for straightforward handling and transport. Its finish in black, blue and chrome provides a practical, durable appearance suited to utility use.

Advantages

The pump combines high flow rate and a relatively low minimum water level requirement, enabling quicker emptying of flooded areas and shallow pools. The 1,100 W motor provides consistent performance for continuous operation, while the 5 m maximum immersion depth expands flexibility for deeper sump or well applications. Compact dimensions and 5.9 kg weight make the unit easy to move and install without additional lifting equipment. The corrosion-resistant exterior finishes are chosen for durability in wet conditions.

Suitable for

• Draining flooded basements and garages
• Emptying garden ponds and pools
• Water transfer from cisterns and tanks
• Site dewatering for small construction or renovation works
• Temporary removal of rainwater from yards and driveways

Key specifications

• Pumping capacity: 15,000 litres per hour
• Power consumption: 1,100 W
• Minimum operating water level: 5 cm
• Maximum immersion depth: 5 m
• Weight: 5.9 kg
• Available finish colours: black, blue, chrome

How to use

Place the pump on a stable surface within the water to be removed, ensuring the power cable and discharge hose are routed safely away from the work area. Connect an appropriate discharge hose to the outlet and secure it to prevent detachment during operation. Plug the pump into a properly rated electrical supply with grounding and switch on. Monitor operation to ensure continuous flow and to avoid running the pump dry; if the water level approaches the minimum operating depth, stop the pump and reposition it if necessary. After use, disconnect power, drain remaining water, and store the unit in a dry place.

Recommendations

For safe and long-lasting operation, use a suitable discharge hose rated for the flow, avoid abrasive or solid-laden water that may damage the impeller, and ensure the electrical supply is protected by an appropriate residual current device (RCD). Periodically inspect the pump housing, seals and cable for wear and clean any debris from the inlet area before storage.