DVI-kabel VALUE Monitor DVI (24+1) Dual Link M/F 5,0 m

The VALUE Monitor DVI Cable (24+1) Dual Link, 5.0 m, provides a digital connection between a graphics card and a DVI-equipped monitor or projector. Designed for dual-link DVI-D interfaces, this cable supports high-resolution video signals without quality loss from digital-to-analog conversion. It is suitable for displays that require a dual-link connection for resolutions above standard single-link limits.

Advantages

This DVI cable transmits digital video signals directly, preventing degradation caused by digital-to-analog conversions. The dual-link (24+1) wiring enables higher bandwidth for increased resolution and refresh rates compared with single-link DVI solutions. The 5.0 m length allows flexible placement of monitor and source devices while maintaining a reliable black-coloured DVI-D connection.

Suitable for

• Connecting DVI-D equipped monitors to desktop graphics cards
• High-resolution TFT/LCD monitors and projectors requiring dual-link bandwidth
• Setups where a 5.0 m cable length is needed for device placement

Key specifications

• Cable length: 5 m
• Connector 1: DVI-D (24+1, Dual Link)
• Connector 2: DVI-D (24+1, Dual Link)
• Product colour: Black
• Brand: VALUE
• MPN: 11.99.5565
• EAN: 7611990199174

How to use

Power off both the computer/graphics source and the monitor or projector before connecting. Firmly insert the DVI-D connector into the DVI port on the graphics card and the corresponding connector into the monitor or projector input. Tighten the side screws to secure the connection. After securing the cable, power on the display and the source device and configure the desired resolution and refresh rate in the operating system or graphics driver settings.

Recommendations

For monitors up to approximately 38 cm (15 inches) a single-link DVI cable is usually sufficient; for larger TFT/LCD displays and applications that demand higher resolutions, use a dual-link DVI cable such as this model to ensure full bandwidth and image quality.