Edding 4085/4W krijtmarker metallic 1–2 mm punt, 4-delige set

Edding 4085/4W Kreidemarker metallic 1–2 mm tip, 4-piece pack contains four metallic chalk markers designed for use on non-porous surfaces. The markers feature a 1–2 mm bullet tip that produces fine to medium strokes for detailed lettering, outlines and decorative accents. Water-based metallic ink provides opaque coverage on glass, mirrors, metal and chalkboards and can be wiped off smooth non-porous surfaces with a damp cloth or appropriate cleaner.

Advantages

The set combines four metallic colours in a single pack, offering consistent ink flow and reliable opacity for short-term signage and craft projects. The 1–2 mm tip enables precise lines and controlled strokes while remaining suitable for small lettering and decorative work. Because the ink is water-based, it is easy to remove from non-porous surfaces without aggressive solvents, and the markers are refillable or replaceable within the Edding chalk marker family for continued use.

Suitable for

• Writing and lettering on glass and mirrors
• Menu boards, café and restaurant signage
• Crafts, DIY decoration and scrapbooking accents
• Temporary markings on metal, glazed ceramics and plastics

Key specifications

• Tip type: bullet/round
• Tip width: 1–2 mm (fine to medium)
• Ink type: water-based chalk marker ink with metallic pigments
• Suitable surfaces: non-porous (glass, mirrors, metal, glazed ceramics, chalkboards)
• Pack contents: 4 metallic markers

How to use

Shake each marker before use to mix the metallic pigments evenly. Prime the tip by pressing it down several times on a scrap of paper or glass until ink flows. Write or draw using light pressure for fine lines and increased pressure for broader strokes within the 1–2 mm range. Allow the ink to dry briefly for best opacity. To remove from non-porous surfaces, wipe with a damp cloth or use a mild cleaner; test on a small area first if unsure.

Recommendations

Store markers horizontally when not in use and cap them tightly to prevent drying. Use on sealed, smooth non-porous surfaces for optimal removability and visual effect. Avoid use on porous materials such as unsealed wood or paper, where the ink may not be removable. If prolonged outdoor exposure is required, verify adhesion and weather resistance before applying to important signage.