Elektrische pomp Cycplus AL1 – draagbare inflator voor fietsen, scooters en sportuitrusting

Cycplus AL1 Electric Inflator

The Cycplus A2 Plus is a portable electric tire and ball inflator designed for fast and precise inflation. It offers a maximum pressure of 150 PSI, an automatic shut-off function, and a measurement accuracy of ±0.1 bar to safely set the target pressure. The compact design houses an easy-to-read, anti-glare LED screen and control buttons, all complemented by a convenient retractable hose.

Fast pumping thanks to a powerful motor

A specially designed high-power motor provides up to a 100% increase in pumping speed compared to standard solutions. In practice, this means you can inflate a 195/65R15 car tire from 2.0 to 2.5 bar in about 1 minute, and a full inflation from zero will take about 6 minutes. That's not the end of the possibilities, however. A motorcycle tire reaches 50 PSI in about 2-3 minutes, and a 700×25C road tire even reaches 120 PSI in about 1 minute. So you can get ready for the road ahead in no time!

Precision and full pressure control

The pump allows you to set a target pressure value, once it reaches it, it automatically shuts off. With an accuracy of up to ±0.1 bar, you can be sure that your tires are inflated exactly as needed. The anti-glare LED screen presents the current parameters in an easy-to-read manner, making it easy to operate even in more difficult lighting conditions.

Powerful battery and powerbank function

The Cycplus A2 Plus is equipped with a high-capacity battery of 3 × 2600 mAh, giving a total of 7800 mAh at 3.7 volts. Such a solution allows you to pump repeatedly without the need for frequent charging, and additionally allows you to use the device as an emergency powerbank. This is a practical support on the go when you need to recharge your phone or other mobile equipment.

Two ways to power up and be ready for any situation

The device can operate in two ways: wirelessly, with USB-C charging and QC 3.0 support, and wired, with power via a DC outlet. This combination makes the pump ready to work both at home and on the road, regardless of access to standard power sources.

Safe operation and effective cooling

The pump is designed for efficient heat dissipation. Mesh vents, a metal core to accelerate heat transfer and a built-in spiral fan take care of rapid cooling, allowing stable operation even under heavy use and reducing the risk of overheating.

Versatility

The A2 Plus is compatible with Presta and Schrader valves, making it suitable for inflating car, motorcycle and bicycle tires and balls. What's more, an additional LED emergency lighting function increases safety during nighttime stops and makes it easier to operate the unit after dark.

Included

• Cycplus A2 Plus electric pump x1
• Carrying case x1
• USB-A to USB-C cable x1
• DC power cable for car outlet x1
• Valve extensions and adapters x3
• Ball pump needle x1
• User manual x1

How to use

Connect the appropriate adapter to the valve type, attach the retractable hose to the tyre or inflatable, and set the desired target pressure on the LED screen. Start the pump and wait for the automatic shut-off at the selected pressure; the display shows current pressure during inflation. Recharge the unit using the USB-C port or the DC input as needed, and use the powerbank function to charge mobile devices if required.

Recommendations

Check the recommended tyre pressure on the tyre sidewall or equipment manual before setting the target value. Allow short pauses between extended inflations if performing multiple full inflations in a row to support cooling. Keep the pump and vents free from dust and moisture; store in a dry place when not in use and recharge the battery periodically to preserve capacity.