Elektrische schakelaar 1P Merten MEG3117-0000, 1-polig, 10 A, 250 V, metallic, IP20

Merten MEG3117-0000 is a single-pole (1P) electrical switch with a metallic finish designed for indoor installations. Rated for AC 250 V and a nominal current of 10 A, the switch provides basic on/off control for lighting circuits and other low-power loads. With IP20 protection and a compact form factor, it integrates into standard modular electrical fittings for residential and light commercial use.

Advantages

The switch combines a durable metallic appearance with a compact single-pole design suitable for standard wall plates. Its 10 A current rating and 250 V operating voltage meet common requirements for lighting and small appliance control. IP20 protection ensures safety for indoor environments while the modular format simplifies installation and replacement in existing switch panels.

Suitable for

• Control of indoor lighting circuits in homes and offices
• On/off switching for low-power appliances and fixtures
• Replacement or upgrade in standard modular switch panels
• Installations where a metallic aesthetic is preferred

Key specifications

• Contact configuration: single-pole (1P)
• Nominal current: 10 A
• Rated voltage: AC 250 V
• Protection rating: IP20 (indoor use)
• Finish: metallic
• Mounting: modular switch frame compatibility

How to use

Install the switch into a compatible modular frame following local electrical codes. Ensure power is turned off at the circuit breaker before connecting conductors to the switch terminals. The single-pole contact controls the live conductor; connect the incoming live and outgoing load wires to the designated terminals and secure them. After wiring, mount the switch into the frame and restore power to verify correct on/off operation of the controlled circuit.

Recommendations

Use this switch only in dry, indoor environments appropriate for IP20-rated devices. Ensure the connected load does not exceed 10 A and 250 V. For installations involving complex circuits, multi-way switching, or higher currents, select a device rated for those conditions or consult a qualified electrician. Regularly inspect the switch for wear and replace it if mechanical operation becomes unreliable.