Fiberlogy PLA Impact Filament 1.75 mm, Black, 1 kg (3S-PLA.IM)

Fiberlogy PLA Impact is an advanced 3D printing filament that combines the ease of printing PLA with ABS-comparable mechanical strength. It offers increased impact strength (Izod 160 J/m), crack resistance, and greater heat resistance than standard PLA. Suitable for functional prototypes, replacement parts, and tools exposed to mechanical loads – and no enclosed chamber is required for printing.

PLA Impact combines the ease and safety of printing typical of PLA with mechanical strength that the manufacturer states is comparable to ABS filaments. Thanks to its increased impact strength and better temperature resistance, prints are less prone to cracking or breaking, making the material suited to more demanding conditions.

The filament is intended for functional prototypes, replacement parts, and tools exposed to mechanical and thermal stress, while maintaining a high level of detail – suitable for both technical and aesthetic components. It can be used by experienced 3D printer owners as well as those just starting to work with higher-strength materials.

It is based on NatureWorks Ingeo™ PLA, produced from renewable plant-based raw materials such as corn starch. This raw material is distinguished by a homogeneous composition, low impurity levels, a stable melting temperature, a low risk of nozzle clogging, and minimal warping.

Key features

• High impact strength – 160 J/m (Izod, notched, 23 °C)
• Resistant to cracking and breaking
• Per the manufacturer, greater heat resistance than standard PLA and ABS-comparable mechanical strength
• PLA-like ease of printing – no enclosed chamber required
• High level of detail and a quality surface finish
• Diameter 1.75 mm
• Packaging: Spool or Refill
• New spool system compatible with Bambu Lab AMS
• 14 colours, including green, khaki, and dark shades

Suitable for

• Functional prototypes, replacement parts, tools, brackets, housings, fasteners, and other parts that need better impact resistance than regular PLA, without moving to more demanding materials such as ABS that require an enclosed chamber.

Printing parameters

• Printing temperature: 220–245 °C
• Bed temperature: 60 °C
• Recommended bed surface: Smooth PEI, textured PEI, glass
• Drying conditions: 50 °C / 4 hours
• Enclosed chamber: Not required
• Part-cooling fan: 75–100%

Technical specifications

• Material: Modified PLA (polylactide), NatureWorks Ingeo™
• Density: 1.22 g/cm³
• Glass transition temperature: 55–60 °C (DSC)
• Tensile strength: 40 MPa (ASTM D638)
• Tensile modulus: 2,870 MPa (ASTM D882)
• Izod impact strength (notched) @ 23 °C: 160 J/m (ASTM D256)
• Flexural strength: 73 MPa (ASTM D790)
• Flexural modulus: 2,410 MPa (ASTM D790)
• Packaging type: Spool or Refill
• Compatibility: FDM 3D printers; the new spool system is compatible with Bambu Lab AMS
• Manufacturer code (SKU): 3S-PLA.IM

Good to know

• Although the manufacturer states greater heat resistance than standard PLA, the stated glass transition temperature (55–60 °C) is similar to regular PLA, and no heat deflection temperature (HDT) value is given. For parts exposed to high temperatures, test under real conditions first.
• The printing temperature (220–245 °C) is higher than for standard PLA – check that your printer's hotend and settings are suitable.
• Like other PLA-based filaments, the material absorbs moisture – store it in a sealed package and, if needed, dry it at 50 °C for 4 hours.
• Mechanical properties are based on the manufacturer's data (TDS); actual results depend on the printer, settings, part orientation, and infill.
• Spool dimensions and exact filament length are not stated on the manufacturer's page – if this matters for your AMS or spool holder, confirm with your supplier.
• Prekės ženklas: Fiberlogy | Gamintojo kodas: 3S-PLA.IM | Serija: PLA Impact
• Plotis (mm): 200
• Aukštis (mm): 200
• Svoris (g): 1000
• Spalva: Juodas
• Package weight (kg): 1.422000000