Filament Creality SILK blauwgroen 1,75 mm 1 kg spoel voor 3D-printen

Creality SILK BLUE GREEN filament is a 1.75 mm, 1 kg spool formulated as a silk-style PLA blend for FDM 3D printers. The material delivers a glossy, satin-like surface and smooth layer appearance suitable for decorative parts, prototypes and display models. This filament is designed for use with standard desktop printers that accept 1.75 mm PLA-type materials and benefits from manufacturer-recommended print settings to achieve consistent extrusion and visual quality.

Advantages

The silk PLA blend offers a high-gloss finish with reduced visible layer lines compared to standard PLA, producing parts with a silk-like sheen without additional post-processing. It provides reliable dimensional stability, good bed adhesion on common build surfaces, and predictable extrusion behavior at typical PLA temperatures. The color shift between blue and green tones creates visually appealing gradients on curved surfaces and contours.

Suitable for

• Decorative objects and figurines
• Presentation models and display pieces
• Rapid prototyping of non-functional parts
• Cosmetic covers and aesthetic components
• Educational and hobbyist printing projects

Key specifications

• Material type: silk-style PLA blend
• Filament diameter: 1.75 mm nominal
• Net weight: 1 kg spool
• Appearance: glossy / satin finish with blue-to-green color variation
• Recommended printer type: FDM desktop printers compatible with 1.75 mm filament
• Typical printing temperature range: standard PLA temperature window (refer to manufacturer guidance)

How to use

Load the 1.75 mm filament into a compatible FDM printer following the printer manufacturer’s filament loading procedure. Set the nozzle and bed temperatures according to PLA recommendations and the filament manufacturer’s guidance, ensure correct extrusion multiplier and flow settings, and calibrate retraction to reduce stringing. Use a clean build surface and appropriate adhesion method such as a heated bed, glue stick, or blue painter’s tape where applicable. Print at moderate speeds to preserve the silk finish and monitor the first layers to confirm good adhesion and extrusion consistency.

Recommendations

For best results, use the filament within a sealed container with desiccant to avoid moisture absorption, and dry the spool if it has been exposed to humid conditions. Adjust print cooling and layer height to balance surface gloss and detail; lower layer heights typically enhance the silk effect. Avoid using the filament for load-bearing or high-temperature applications, as PLA-based materials have limited heat resistance compared with engineering plastics.