Gatenzaag KWB 500238 3,8 cm voor keramiek en steen

The KWB 500238 hole saw with a 3.8 cm (38 mm) diameter is designed for drilling precise holes in hard surfaces such as ceramic, porcelain stoneware, stoneware, marble, natural stone and similar materials. The tool features an industrial diamond-coated cutting body and an M14 holding thread for use with angle grinders. Two cutting depth ranges are specified for the series: diameters from 6 mm to 14 mm with 35 mm cutting depth, and diameters from 20 mm to 68 mm with 45 mm cutting depth. The product is supplied in a reusable screw tube package.

Advantages

The diamond-coated hole saw cuts at high speeds without additional cooling and is suitable for continuous use on hard surfaces. The M14 holding thread enables secure mounting on standard angle grinders. The reusable screw tube packaging protects the tool in storage and transport.

Suitable for

Key specifications

How to use

Secure the hole saw to an angle grinder using the M14 holding thread according to the grinder manufacturer's instructions. Mark the drilling position on the workpiece, start the grinder at low speed to establish the cut, then increase speed as appropriate for the material. Apply steady, moderate pressure and avoid forcing the tool. The product is intended for dry drilling at high speed without additional coolant.

Recommendations

When working with brittle or polished surfaces such as tiles or marble, support the workpiece to avoid chipping and use a steady hand to maintain perpendicular alignment. Allow the tool to cool between prolonged cuts and replace the hole saw if diamond segments show significant wear.