Glasvezel-transceiver BlueOptics AA1404005-E6 40000 Mbit/s QSFP 850 nm

The BlueOptics AA1404005-E6 40000 Mbit/s QSFP 850 nm is a compact fiber optic transceiver module designed for high-speed short-range data links. With a QSFP interface and a maximum data transfer rate of 40 Gbit/s, this module supports high-density network environments where reliable, low-latency connections are required. The transceiver operates at an 850 nm wavelength and comes in a lightweight, silver-coloured housing weighing approximately 20 g, suitable for integration into switches, routers and optical aggregation equipment.

Advantages

This QSFP transceiver provides a standardized connection that enables 40 Gbit/s links over multimode fiber at 850 nm, offering straightforward interoperability with compatible networking hardware. Its compact QSFP form factor supports high port density in rack-mounted equipment while the low weight and simple hot-pluggable design facilitate installation and replacement. The module’s silver housing and industry-standard interface ensure consistent electrical and optical performance in short-reach data centre and enterprise environments.

Suitable for

• 40 Gbit/s uplinks between switches or routers in data centres
• High-density aggregation panels and blade chassis
• Short-reach multimode fiber links (850 nm) within enterprise campus or server rooms
• Environments requiring QSFP form factor for port consolidation

Key specifications

• Interface type: QSFP
• Maximum data transfer rate: 40000 Mbit/s (40 Gbit/s)
• Operating wavelength: 850 nm
• Applicable fiber type: multimode fiber (short-reach)
• Product colour: Silver
• Weight: 0.02 kg

How to use

Insert the BlueOptics QSFP transceiver into a compatible QSFP port on your network device while the host is powered according to the device manufacturer’s hot-plug instructions. Connect appropriate multimode fiber cables terminated with the recommended connector type for QSFP short-range links, ensuring proper fiber routing and bend radius. Verify link status and configuration through your switch or router management interface and adjust port settings (speed, duplex, or link aggregation) as required for your network design.

Recommendations

Handle the module by its edges, keep protective caps on unused optical connectors, and avoid touching the optical interfaces. Use multimode fiber certified for 850 nm short-reach applications and check compatibility lists from the host device manufacturer before deployment. For reliable performance, maintain appropriate operating temperatures and inspect fiber connectors for cleanliness prior to link activation.