Glasvezel-transceivermodule BlueOptics AC-SFP+-SM-10 10000 Mbit/s SFP+ 1310 nm

The BlueOptics AC-SFP+-SM-10 is a fiber optic transceiver module engineered for 10 Gbit/s data links. It uses an SFP+ form factor and transmits at a wavelength of 1310 nm, enabling high-speed single-mode fiber connections over moderate distances. The module is designed for integration into switches, routers and servers that accept SFP+ modules, providing a compact solution for uplinks, server connections and network aggregation points.

Advantages

The module supports a 10000 Mbit/s transfer rate through an SFP+ interface, offering compatibility with standard SFP+ ports while keeping a small physical footprint. Operating at 1310 nm on single-mode fiber, it combines reliable optical performance with low power consumption and straightforward hot-pluggable installation. The product is suitable for mixed-vendor environments where adherence to common optical and electrical interfaces is required.

Suitable for

• 10 Gbps uplinks between switches and core network devices
• High-speed server connections in data centers
• Aggregation links in campus and enterprise networks
• Replacement or upgrade of existing SFP+ transceivers supporting 1310 nm single-mode fiber

Key specifications

• Interface: SFP+
• Nominal wavelength: 1310 nm
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Fiber type: single-mode fiber
• Form factor: SFP+ hot-pluggable module

How to use

Install the BlueOptics AC-SFP+-SM-10 into a compatible SFP+ port on your network device while the device is powered according to the manufacturer's guidance for hot-pluggable modules. Connect single-mode fiber patch cables with appropriate connectors to the transceiver, observe correct connector orientation and ensure proper fiber routing to avoid bending beyond the recommended radius. After physical installation, verify link status and speed on the host device and configure any necessary port settings such as speed, duplex and link negotiation according to your network equipment documentation.

Recommendations

For reliable operation, use single-mode fiber rated for 1310 nm and maintain clean connector endfaces. Avoid excessive mechanical stress on fiber runs, and validate compatibility with your switch or router vendor's supported transceiver list if interoperability confirmation is required.