Glasvezel-transceivermodule BlueOptics J9152-69101 10000 Mbit/s SFP+ 1310 nm

The BlueOptics J9152-69101 10000 Mbit/s SFP+ 1310 nm fiber optic transceiver module is designed for high-speed optical links in data center and enterprise networks. It supports 10 Gbps transmission using an SFP+ interface and operates at a 1310 nm wavelength, providing a standard single-mode fiber option for short- to medium-range connections. The module is intended for installation in compatible SFP+ ports on switches, routers or media converters to extend optical connectivity and maintain reliable signal integrity.

Advantages

This transceiver offers a compact SFP+ form factor that reduces space consumption in dense networking environments while delivering a 10 Gbps data rate. The 1310 nm operating wavelength provides stable optical performance over single-mode fiber, and the module is built for straightforward hot-pluggable installation into standard SFP+ slots. These characteristics ensure predictable throughput and compatibility with a wide range of networking equipment that supports SFP+ optics.

Suitable for

• 10 Gbps uplinks between switches and routers
• Fiber connections in data center racks and server rooms
• Inter-building or campus backbone links using single-mode fiber
• Media converters and optical transport modules requiring SFP+ optics

Key specifications

• Interface: SFP+ form factor for 10 Gbps ports
• Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
• Operating wavelength: 1310 nm
• Fiber type: single-mode fiber (SMF) compatible
• Optical link: designed for short- to medium-range single-mode connections
• Hot-pluggable design for easy insertion and removal

How to use

Install the transceiver carefully into an available SFP+ slot on the supported network device until it clicks into place, ensuring the device is powered according to the manufacturer’s guidelines. Connect the single-mode fiber cable to the transceiver using the appropriate connector type, verify correct polarity, and secure the cable to avoid strain. Configure the network device port for 10 Gbps operation if necessary and monitor the link status via the device management interface to confirm proper operation.

Recommendations

Use quality single-mode fiber and ensure clean connector end-faces to preserve signal integrity. Verify compatibility with your switch or router vendor’s supported SFP+ transceivers and follow ESD precautions during handling. For optimal performance, select appropriate fiber patch cords and maintain recommended maximum link distances for 1310 nm single-mode operation.