Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium

Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
51,34 €
The BlueOptics MCX0JXE51-BO SFP+ LC Aluminium is a fiber optic transceiver module designed for 10 Gbps multimode applications. Built in an aluminium housing and weighing approximately 20 g, this SFP+ module uses an LC duplex connector and follows MSA SFP+ form-factor standards to provide high-speed ... Lees meer
Voorraad 913 Code 1475905 Merk BLUEOPTICS Model MCX0JXE51-BO Garantie 2 jaar

Bezorging & retourneren

Verwachte bezorgdatum vrijdag, oktober 23
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

The BlueOptics MCX0JXE51-BO SFP+ LC Aluminium is a fiber optic transceiver module designed for 10 Gbps multimode applications. Built in an aluminium housing and weighing approximately 20 g, this SFP+ module uses an LC duplex connector and follows MSA SFP+ form-factor standards to provide high-speed optical connectivity for compatible network equipment. The module supports 10GBASE-SR multimode transmission with an 850 nm wavelength and is intended for short-range fiber links.

Advantages

The transceiver offers compact SFP+ form factor compatibility for a variety of switches, routers and storage systems, and is manufactured to comply with common MSA standards for host interoperability. Its aluminium case provides physical durability while keeping the module lightweight. The design supports simultaneous transmit and receive over LC duplex multimode fiber and offers digital diagnostics monitoring (DDM/DOM) capability when supported by the host, enabling real-time status reporting for voltage, temperature, optical power and laser bias current.

Suitable for

Key specifications

How to use

Install the transceiver into a compatible SFP+ slot on your switch, router or storage device, ensuring the host device supports 10GBASE-SR SFP+ modules and DDM if diagnostics are required. Connect LC duplex multimode fiber patch cords to the module with correct TX/RX orientation. Configure the host interface according to the equipment vendor instructions and verify link status and diagnostics through the host management interface. Remove the protective dust caps from the module and fiber connectors before insertion and replace them when the module is not in use.

Recommendations

Use multimode fiber of appropriate grade (OM3/OM4 recommended for optimal 10G performance over longer short-range distances), keep fiber connectors clean using proper cleaning tools, and ensure firmware and driver compatibility on host equipment to maintain link stability and enable DDM functions.

Belangrijkste kenmerken
  • 10 Gbps short-range multimode fiber links (data center patching)
  • Interconnects between switches, routers and servers supporting SFP+ 10GBASE-SR
  • Storage area network (SAN) and NAS uplinks using multimode fiber
  • Hardware platforms that accept SFP+ modules with LC duplex connectors
  • Form factor: SFP+ (10G)
  • Optical mode: Multimode fiber
  • Wavelength: 850 nm
  • Connector: LC duplex
  • Typical maximum distance: up to 300 meters on appropriate multimode fiber
  • Housing material: Aluminium
  • Weight: approximately 0.02 kg
  • Digital Diagnostics Monitoring (DDM/DOM): supported when host hardware provides interface support
Specificaties
Aantal per verpakking
1 pc(s)
Bedrijfstemperatuur (T-T)
0 - 70
Ethernet LAN
Yes
Garantieperiode
5 year(s)
Gewicht
0.02 kg
Gewicht verpakking
30 g
Glasvezel-ethernetbekabelingstechnologie
10GBASE
Glasvezelconnector
LC
Interfacetype
SFP+
Maximale overdrachtsafstand
300 m
Productkleur
Aluminium
Rx-golflengte (max.)
850 nm
Tx-golflengte (max.)
850 nm
Type ethernetinterface
10 Gigabit Ethernet
Type SFP-transceiver
Fiber optic
Prijsverloop van de afgelopen 6 maanden
Glasvezel-transceivermodule BlueOptics MCX0JXE51-BO SFP+ LC aluminium
Actueel
51,34 €
Laagste
50,61 €
Hoogste
60,32 €
Wijziging 24 uur
+0,61 €   +1%
Week
+0,71 €   +1%
Maand
-6,03 €   -11%

Populaire producten in deze categorie

Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.