Hamer-trekker Wolfcraft 6945000, staal, 80×170×410 mm

The Wolfcraft 6945000 hammer pulling ledge is an accessory for installing and finishing laminate and parquet floors. It enables joint-free attachment of panels by allowing panels adjacent to the wall to be joined to the already-laid area without hammering directly on the plank. The tool is suitable for planks with a thickness of 7 mm and above and is supplied fixed on card as single unit packaging.

Advantages

The tool replaces both a hammer tapping block and a pulling ledge, combining force and control in one safe, ergonomic product. It can be used in push or pull direction, reduces the error rate to zero by eliminating hammer-induced damage and injuries, and is designed for durable use. Packaging contains one hammer pulling ledge fixed on card.

Suitable for

• Joining laminate or parquet panels adjacent to walls
• Installing planks with thicknesses from 7 mm and above
• Flooring work where hammer access is restricted or direct tapping is undesirable

Key specifications

• Brand: Wolfcraft
• Model / MPN: 6945000
• EAN: 4006885694507
• Application: hammer tapping block and pulling ledge replacement
• Suitable plank thickness: ≥ 7 mm
• Packaging: single unit fixed on card

How to use

Place the hammer pulling ledge between the installed area and the new panel adjacent to the wall. Use it as a tapping block or pulling ledge in push or pull direction to engage and lock the panel joints without impact on the plank surface. Apply steady, controlled force via the tool instead of hammering directly on the flooring to achieve a tight joint and prevent damage.

Recommendations

For best results use the Wolfcraft 6945000 with planks 7 mm and thicker and check the alignment of panels before applying force. Store the tool dry and avoid excessive bending or prying beyond recommended use to preserve its shape and function.