HDMI-kabel Vention AHCBD 0,5 m, HDMI type A stekker naar HDMI type A bus, HDMI 2.0, vergulde contacten, zwart

Vention AHCBD is a 0.5 m HDMI 2.0 cable with HDMI Type A male to HDMI Type A female connectors and gold-plated contacts. It is designed to transmit high-definition audio and video signals and serves as a compact extension or gender-swap adapter for TVs, monitors, projectors and other AV equipment. The cable supports 4K resolution at 60 Hz and HDR content where supported by connected devices, and comes in a black finish.

Advantages

The cable supports HDMI 2.0 bandwidth for 4K@60Hz playback and HDR, ensuring synchronized audio and video output with minimal delay and no flicker. Gold-plated contacts improve contact reliability and corrosion resistance. Its short 0.5 m length and male-to-female configuration provide a convenient extension or adapter solution without adding significant bulk.

Suitable for

• Extending an existing HDMI connection by 0.5 m
• Changing connector orientation or converting between HDMI Type A male and female
• Connecting TVs, monitors, projectors, set-top boxes and other AV devices where short cable length is sufficient

When it may not be suitable

This short 0.5 m cable is not intended for long-distance signal transmission; for runs longer than a few meters use a longer high-quality HDMI cable or an active/extender solution. It also does not replace adapters for different HDMI connector types (micro/mini HDMI) or professional installation requirements that need specific shielding, locking connectors or certified high-bandwidth cables beyond HDMI 2.0 capabilities.

Key specifications

• HDMI version: 2.0
• Maximum resolution/refresh: 4K (3840×2160) at 60 Hz
• HDR support: Yes (when supported by source and display)
• Connector A: HDMI Type A male (standard)
• Connector B: HDMI Type A female (standard)
• Cable length: 0.5 m
• Color: Black
• Contacts: Gold-plated

How to use

Plug the HDMI Type A male end into the source device or existing HDMI cable, and insert the HDMI Type A female end to receive the display device’s HDMI plug or to extend an existing cable. Ensure both connected devices support the desired resolution and HDR settings, and select the appropriate input on the display. Avoid sharp bends and excessive tension on the cable to preserve signal integrity.

What to consider before purchase

• Required cable length — 0.5 m is suitable for short extensions only
• Compatibility — both source and display must support HDMI 2.0 features (4K@60Hz, HDR)
• Connector type — this is HDMI Type A male to HDMI Type A female (standard)
• Use case — not intended for long runs or where locking connectors/shielding are required

Recommendations

If you need a short extension or a gender-swap between HDMI Type A connectors for TVs, monitors or projectors, use the Vention AHCBD 0.5 m cable with devices that support HDMI 2.0 and 4K@60Hz. For longer distances or different connector types, choose a suitable longer cable or appropriate adapter.