Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD

Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
41,84 €
For system builders and upgraders seeking a responsive boot drive without overspending, the Hiksemi Wave(P) 128GB M.2 NVMe SSD delivers a tangible speed boost over SATA alternatives. Installed in a desktop or laptop with an M.2 2280 slot, it accelerates Windows or Linux startup, reduces game load ti... Lees meer
Voorraad Niet op voorraad Code 3352076 Merk HIKSEMI Model HS-SSD-WAVE-P-128G Garantie 2 jaar

Bezorging & retourneren

Verwachte bezorgdatum woensdag, oktober 28
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

For system builders and upgraders seeking a responsive boot drive without overspending, the Hiksemi Wave(P) 128GB M.2 NVMe SSD delivers a tangible speed boost over SATA alternatives. Installed in a desktop or laptop with an M.2 2280 slot, it accelerates Windows or Linux startup, reduces game load times, and keeps everyday multitasking fluid. The PCIe Gen3 x4 interface and NVMe 1.3 protocol unlock sequential reads up to 2100 MB/s—nearly four times faster than typical SATA SSDs—so large files transfer in seconds rather than minutes.

Key specifications

  • Capacity: 128 GB (usable after formatting may vary)
  • Form factor: M.2 2280 (22 mm wide, 80 mm long)
  • Interface: PCIe Gen3 x4, NVMe 1.3
  • NAND flash: 3D TLC
  • Sequential read: up to 2100 MB/s
  • Sequential write: up to 700 MB/s
  • Random read IOPS (4 KB): up to 90,000
  • Random write IOPS (4 KB): up to 150,000
  • Endurance: 60 TBW
  • MTBF: 1,500,000 hours
  • Operating temperature: 0°C to 70°C
  • Shock resistance: 1500G/0.5 ms
  • Warranty: 3-year limited

Why choose it

This drive balances capacity, performance, and reliability for budget-conscious builds. The 3D TLC NAND offers a good mix of endurance and cost, while S.M.A.R.T. and TRIM support help maintain long-term consistency. With a 60 TBW rating, it can handle daily writes for years in typical consumer workloads. The compact M.2 2280 design frees up drive bays and reduces cable clutter, improving airflow in small form factor PCs.

Ideal use cases

  • Boot drive for a budget gaming PC or office workstation
  • Upgrading an older laptop from a hard drive to NVMe
  • Secondary drive for frequently used applications
  • Light content creation and photo editing

Good to know

Installation requires a motherboard with an M.2 M-key slot supporting PCIe NVMe. Check your system's BIOS and driver support for NVMe boot. The drive operates without a heatsink under normal conditions, but sustained heavy writes may benefit from additional airflow. Actual performance varies by system configuration and workload.

Specificaties
Bedrijfstemperatuur (T-T)
0 - 70 °C
Capaciteit schijf
128 GB
Categorie
SSD
EAN
6974202725693
Geheugentype
3D TLC NAND
Gemiddelde tijd tussen storingen (MTBF)
1,500,000 hours
Gewicht
54 g
Interface
PCIe Gen3 x4
Leessnelheid
2100 MB/s
Maximale bedrijfstemperatuur
70 °C
Merk
Hiksemi
Minimale bedrijfstemperatuur
0 °C
Model
Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
MPN
HS-SSD-WAVE-P-128G
NVMe
Yes
NVMe-versie
1.3
Productserie
Wave(P)
Schrijfsnelheid
700 MB/s
SSD-capaciteit
128 GB
Stroomverbruik (gemiddeld)
3.5 W
Vormfactor SSD
M.2 2280
Prijsverloop van de afgelopen 6 maanden
Hiksemi Wave(P) 128GB Gen3 M.2 NVMe 3D NAND SSD
Actueel
41,84 €
Laagste
40,89 €
Hoogste
41,84 €
Wijziging 24 uur
+0,65 €   +2%
Week
+0,60 €   +1%
Maand
+0,70 €   +2%

Populaire producten in deze categorie

Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.