Inbouw gaskookplaat Simfer H3.200.VGRIM, 2 zones, draaiknoppen

The Simfer H3.200.VGRIM is a built-in gas hob designed for compact kitchens. With a 30 cm width and stainless steel surface, it provides two cooking zones with rotary knobs for easy control and automatic ignition located under the handle. The hob supports both natural gas (NG) and liquefied petroleum gas (LPG) and includes enameled grids.

Advantages

The 30 cm width makes this gas hob suitable for small kitchens or as an additional cooking surface. A powerful 2900 W burner delivers fast heating while a 950 W auxiliary burner is intended for gentler simmering. Front-mounted rotary controls and built-in automatic ignition simplify operation and ensure convenient, precise adjustment. Compatibility with both NG and LPG increases installation flexibility.

Suitable for

• Small kitchen spaces and compact apartments
• Secondary or auxiliary cooking stations (e.g., kitchenette, island)
• Users who need two-zone cooking with straightforward controls

Key specifications

• Type: Gas hob
• Width: 30 cm
• Top surface: Stainless steel
• Number of burners: 2 (1 × 2900 W power burner, 1 × 950 W auxiliary burner)
• Controls: Front rotary switches
• Grids: Enameled
• Ignition: Automatic ignition under the handle
• Gas compatibility: Natural gas (NG) and liquefied petroleum gas (LPG)
• Installation compartment width: 270 mm
• Installation compartment depth: 490 mm

How to use

Install the Simfer H3.200.VGRIM into a prepared cut-out sized according to the installation compartment dimensions (width 270 mm, depth 490 mm) and connect it to the appropriate gas supply (NG or LPG) following local regulations. Use the front rotary knobs to ignite burners with the built-in automatic ignition and adjust the flame intensity. Place cookware on the enameled grids and monitor cooking; switch off the gas at the knob after use.

Recommendations

For safe and correct installation, have the hob connected by a qualified technician and verify the correct gas type and pressure. Regularly clean the stainless steel surface and enameled grids after they cool down, and check burners and ignition for proper operation to maintain performance.