InLine DC-verlengkabel, DC-stekker/bus 5,5x2,5mm, AWG 18, zwart 2m

InLine DC extension cable, 2 m long, with 5.5 x 2.5 mm male and female DC connectors. The cable uses AWG 18 conductors and is designed for 12 V DC systems with a rated current of 11.6 A. Its black jacket provides a standard, unobtrusive appearance suitable for audio/video and other low-voltage DC installations.

Advantages

The InLine DC extension cable offers a 2 m reach and matching 5.5 x 2.5 mm connectors on both ends for simple extension of existing DC power leads. AWG 18 conductors provide reliable power transmission for devices within the specified 12 V / 11.6 A limits. The cable’s standard black outer jacket is durable and blends into typical AV or equipment setups.

Suitable for

• Extending DC power leads for routers, cameras and other 12 V devices
• Audio/video equipment requiring 5.5 x 2.5 mm connectors
• Workshop or installation scenarios where a 2 m extension is needed

Key specifications

• Cable length: 2 m
• Connector 1: 5.5 x 2.5 mm (male)
• Connector 2: 5.5 x 2.5 mm (female)
• Wire gauge: AWG 18
• Rated voltage: 12 V DC
• Rated current: 11.6 A
• Colour: Black
• Brand: InLine
• MPN: 26902G
• EAN: 4043718309030

How to use

Connect the male 5.5 x 2.5 mm plug into the power output of your existing adapter or device and insert the female 5.5 x 2.5 mm socket to the device requiring power. Ensure polarity matches and that the connected devices operate within the cable’s rated 12 V and 11.6 A limits. Route the cable to avoid sharp bends and pinching.

Recommendations

Check connector polarity before use and confirm that the device’s voltage and current requirements do not exceed 12 V and 11.6 A. Avoid exposing the cable to extreme heat, direct sunlight, or mechanical damage. For permanent or outdoor installations, consider additional protection such as conduit or weatherproofing.